Recommended Free Tools
iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
For a storage water heater, estimate the hot water your household uses during its busiest hour and choose a model whose first-hour rating (FHR) can meet that demand. Tank gallons alone do not tell you how much hot water the heater can deliver. Tankless heaters need a different calculation: compare their gallons-per-minute (GPM) rating at the required temperature rise with the fixtures you expect to run at the same time.
How to size a storage water heater
- Identify your peak hour. Think of a typical or unusually busy day and identify the hour when the most hot water is likely to be used.
- List the uses that may overlap. Include showers, baths, dishwashing, laundry, and other hot-water uses likely to happen in that hour.
- Estimate the gallons used. Add the estimated hot-water demand for those uses. The result is a planning estimate, not a guarantee of future use.
- Compare the estimate with candidate FHRs. Find each model’s FHR in its product literature or EnergyGuide materials. The U.S. Department of Energy’s older fact sheet recommends choosing an FHR within about two gallons of estimated peak-hour demand; treat this as a rule of thumb, not a code requirement or universal current standard. Read the DOE fact sheet.
ENERGY STAR defines FHR as an estimate of the maximum volume a fully heated storage water heater can supply during the first hour. Its criteria page describes FHR measurement at a 125°F outlet temperature in the UEF test method; that is a test condition, not a recommended household delivery temperature. See ENERGY STAR’s water-heater criteria.
Why tank gallons are not enough
Tank capacity is the amount of water stored; FHR estimates first-hour delivery from a fully heated tank. Similar-capacity models can have different FHRs, so compare the rating for the exact model rather than assuming nominal gallons predict performance.
If your current heater generally meets your needs, its capacity is a practical starting point when researching replacements. Check the nameplate or yellow EnergyGuide label, then compare the replacement candidates’ FHRs. If hot water regularly runs out, reassess peak-hour demand and delivery ratings instead of automatically choosing the same tank size. ENERGY STAR’s guidance for high-efficiency gas storage heaters discusses label information and replacement considerations. Read the ENERGY STAR guidance.
#1 Best Overall
- 【PLEASE NOTE BEFORE PURCHASE】Ensure this 14kW 240V tankless electric water heater meets your hot water demand. Requires 1 x 60-amp circuit breaker. Unit dimensions: 15.87"x11.14"x2.87"; standard 1/2" NPT water connection. No need to disassemble the housing for wiring, making installation faster and more convenient.
- 【ENERGY-SAVING & EFFICIENT】Eliminate standby energy loss with our electric tankless water heater —no preheating, zero idle power use. Reduce your water heating costs by up to 50% compared to traditional models. Compact and space-saving, it installs flexibly under-sink or on-wall.
- 【INSTANT & POWERFUL HOT WATER】With 14kW of heating power and up to 99.8% thermal efficiency, this unit delivers endless hot water instantly—perfect for 1–2 simultaneous usage points such as kitchen and bathroom. No more waiting, just steady hot water when you need it.
- 【SMART TEMPERATURE CONTROL】Equipped with an intuitive LED display you can easily set the desired water temperature from 86°F to 131°F in precise 1°F increments. Once set, the system maintains a stable temperature output even with water pressure fluctuations.
- 【SAFE & RELIABLE OPERATION】Built with advanced water-electricity separation technology to prevent scale buildup and extend lifespan. Safety features include leakage protection, overheating protection, and auto shut-off, giving you peace of mind during every use.
How to size a tankless water heater
Tankless models heat water as it flows, so size them by GPM at the temperature rise specified for the rating—not by storage-tank FHR. First identify which fixtures may run at once, estimate their combined flow demand, and determine the temperature rise needed to bring incoming water to the intended use temperature. Then check the candidate unit’s GPM rating at that temperature rise and its installation requirements. ENERGY STAR defines GPM for instantaneous heaters at a specified test temperature rise, so a tankless GPM figure cannot be compared directly with a storage model’s FHR. See ENERGY STAR’s rating definitions.
What to check when choosing among models
- Delivery rating: Compare FHR for storage heaters or GPM at the required temperature rise for tankless units.
- Demand pattern: Account for clustered or simultaneous uses, not just the number of people in the home.
- Site and energy fit: Verify fuel or electrical service, venting, available space, local code, and the specific model’s installation requirements. These vary by home and product.
- Efficiency and conditions: UEF is the overall-efficiency measure identified by ENERGY STAR. Heat-pump performance and installation suitability depend on operating conditions and model requirements.
- Replacement needs: Use the existing heater’s labeled capacity as a starting point only if it has generally met demand; confirm the replacement’s own delivery rating and requirements.
Heat-pump water heaters: account for high-demand periods
For a heat-pump water heater, follow local plumbing-code minimum FHR requirements and the manufacturer’s sizing recommendations. ENERGY STAR’s Heat Pump Water Heater Guide says: “Follow the local plumbing code’s minimum first-hour rating (FHR) requirements and manufacturer recommendations for tank sizing.” The guide explains that a larger tank can provide more stored hot water for high-demand periods and may reduce reliance on auxiliary resistance heating in hybrid mode, which is less efficient than heat-pump operation. It flags households with concentrated high draws, such as homes where people often take baths, as a reason to consider the usage pattern carefully.
Rank #2
- Note: Please ensure the household circuit breaker panel has a total current capacity of at least 150 amps. Our Orbek tankless water heater electric 14kw requires a 240V/60AMP two-pole breaker, 1 set of 6 AWG wires and 1/2" NPT water connections.
- Instant Hot Water Supply: Orbek electric tankless water heater 240v can provides max 3.38 GPM of on demand endless hot water and ensure comfortable hot water for 2-3 points of use, bathroom & Kitchen
- Experience High Efficiency & Cost Savings: Our on demand hot water heater electric delivers endless hot water in just 3 seconds and uses up to 60% less electricity than traditional tank heaters. Its advanced water-electricity separation technology minimizes scale and corrosion, ensuring lasting performance. Save energy and enjoy reliable, instant hot water.
- Certified Safety & Advanced Protection: This tankless hot water heater is ETL certified and engineered for your peace of mind. It features comprehensive safety systems including leakage, over-temperature, and dry-heating protection, along with lightning resistance. Every unit undergoes rigorous factory testing to ensure safe, reliable, and normal operation in your home.
- Stable Temperature Control: The built-in chip adjusts heating power 20,000 times per second, keeping water temperature stable within 1°F for a comfortable shower experience
Why household size alone cannot give an exact answer
There is no dependable current household-size-to-tank-size table established here, and a fixed gallons-per-person rule would miss the factors that determine whether hot water runs short. The right model depends on peak-hour use, desired overlap of showers and appliances, heater type, incoming-water temperature, fuel and electrical service, venting, available space, local code, and installation conditions. Without those details, a precise tank size or model cannot be selected responsibly.
Free tools Windows power users keep installed
One-click scans. No signup required.
Quick Recap
Best Value
- Important Note: Ensure this tankless water heater meets your installation requirements, 150 Amp Household Service Recommended. The WN18 model is rated at 18KW (240V) with a maximum amperage of 75A. It requires 2 x 40 Amp DP breakers and 2 x 8/2 AWG wiring. The unit dimensions are 11.1” (W) x 19.2 ” (H) x 4” (D), the water connection is 3/4" NPT, Please consult a qualified electrician before purchasing
- Stable Water Temperature: Automatically adjusts energy consumption based on incoming water temperature and flow rate to ensure maximum efficiency, continuous stable temperature, and optimal power usage. Its maximum hot water output is 4.3 gallons per minute. It is perfect for residential shower use, eliminating the need to wait for preheating. There’s no longer any concern about running out of hot water in the tank, and you won’t experience temperature fluctuations during your shower. Provides continuous hot water for showers and everyday household use
- Energy Saving: Self-modulating technology automatically adjusts power consumption based on real-time water flow and the set temperature. When the water flow decreases, the system reduces power to save energy; when not in use, it consumes no electricity, achieving up to 99% energy savings. Compared to traditional tank water heaters, it is more energy-efficient. Ideal for 2–3 bathroom homes in mild to moderate climate conditions
- Space Saving: The WN18 Compact wall-mounted design that frees up storage space, occupying 90% less space compared to traditional tank water heaters. It is suitable for tight areas and can be easily installed anywhere. It provides an endless supply of hot water in a short time without the need to wait for preheating. Equipped with remote WiFi control, you can adjust the temperature without being near the water heater
- Safe Usage: Safety is always WINTEMP’s top priority. The product features multiple safety protections, including leakage protection, overheat protection, and dry-fire protection, and is ETL certified to fully ensure your safety, allowing you to enjoy hot water anytime, anywhere with peace of mind. We also provide a Backed by a 2-year limited manufacturer warranty and long-term technical support. along with long-term professional technical support to give you worry-free use
Rank #4
- Lightweight & Portable for Camping: Make your outdoor trips easier with this compact portable water heater. Weighing only 10 lbs with a folding handle, it fits perfectly in your car or RV. Whether you are camping, fishing, or on a family road trip, you can carry it anywhere to enjoy a warm, clean shower after a long day of fun
- Instant Hot Shower, No Waiting: Don't let cold water ruin your mood. This tankless water heater delivers 1.32 gallons of hot water per minute (GPM) instantly. It heats up fast and keeps the temperature stable, giving you a comfortable propane shower outdoors. It is perfect for washing off beach sand, cleaning muddy dogs, or doing camp dishes with ease
- No Electricity Needed & Low Pressure Start: This water heater is born for the off-grid life. It lights up easily with just 3.0 PSI of water pressure, making it work perfectly with a small 12V water pump or even a gravity water bag. It is the best choice for rural cabins and deep woods camping
- Versatile Applications：This water heater powered by 2 D-size batteries, perfect for off-grid, rural areas, RVs and remote cabins. Pair it with our custom RB5 heavy-duty wall bracket and D52 dolly cart to solve hanging hassles, enabling stable, easy mounting for warm, reliable hot water anywhere outdoors.
- Safe for Family & Pets (CSA Certified) Safety comes first. This outdoor water heater is CSA approved and features 6-in-1 protection, including overheat and anti-flame safety checks. You can trust it to provide a safe, warm bath for your children and pets without worrying about scalding or gas leaks
Rank #3
- 【Instant Heating & Precise Temperature Control 】This 110V 3000W tankless water heater adopts premium stainless steel and ABS materials, heating water instantly in seconds without preheating. It supports temperature adjustment from 82°F (0.3GPM) to 131°F (0.5GPM) to meet daily water demands. The built-in LED display supports Celsius and Fahrenheit switching by long pressing the power button for 6 seconds, enabling real-time and accurate temperature monitoring for convenient use
- 【Full Safety Protection & High Energy Efficiency】 Equipped with comprehensive safety functions, this water heater features IPX4 waterproof, water-electric isolation, leakage-proof, dry-burn-proof and overheating protection, with automatic power-off for idle status. It eliminates daily safety hazards effectively. With a high thermal efficiency of 98%, it cuts down power waste greatly. Intelligent real-time operation monitoring ensures long-term stable and safe working performance
- 【Compact Wall-mounted Design & Versatile Usage】Featuring a lightweight wall-mounted structure, this space-saving water heater takes up no floor space and adapts to various narrow spaces. It is ideal for kitchens, bathrooms, apartments, RVs and outdoor camping. ETL certified with reliable quality, it delivers stable heating
- 【Fast Installation & Standard Universal Interface 】This water heater is designed with pre-drilled fixing holes and standard 1/2 inch NPT connectors, paired with detailed English instructions. It requires no complex tools or professional skills for quick installation, saving your time and cost. Note: This unit is not for shower use, which requires a minimum 1.8GPM water flow for stable heating
- 【Standard Installation Guide & Worry-free After-sales Service 】 To avoid E2 faults, only vertical installation is allowed while horizontal installation is forbidden. Seal pipe joints with Teflon tape, and match with ≥2.5mm² wires and 32A+ circuit breakers. We provide a 24-month warranty and 24/7 online customer service to solve your product and after-sales problems in time
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
