Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more

Phantom Blade Zero requires a 64-bit Windows 10 or Windows 11 PC, 16 GB of RAM, DirectX 12, and an SSD. S-GAME’s minimum profile targets 1080p at 30 frames per second with upscaling enabled, while its standard recommended profile targets 1440p at 60 FPS with upscaling enabled.

Ray tracing and path tracing use separate, substantially higher GPU targets: an RTX 5060 8GB for 1080p/60 FPS ray-traced play and an RTX 5080 16GB for 2160p/60 FPS path-traced play. These are developer targets, not independent benchmark results or guarantees for every scene.

Phantom Blade Zero PC requirements at a glance

S-GAME published the following specifications on August 12, 2026. The conventional minimum and recommended tiers share the same memory, operating-system, graphics API, and storage requirements; the main differences are the processor and graphics card targets.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Profile Processor Graphics card examples Other requirements Stated target
Minimum Intel Core i7-8700K or AMD Ryzen 5 3600 NVIDIA GeForce GTX 1660 6GB or AMD Radeon RX 5500 XT 8GB 16 GB RAM; Windows 10/11 64-bit; DirectX 12; SSD 1080p at 30 FPS with upscaling enabled
Recommended Intel Core i5-10600K or AMD Ryzen 5 5600X NVIDIA GeForce RTX 3060 Ti 8GB or AMD Radeon RX 6700 XT 12GB 16 GB RAM; Windows 10/11 64-bit; DirectX 12; SSD 1440p at 60 FPS with upscaling enabled
Ray-tracing recommended Not specified by S-GAME NVIDIA GeForce RTX 5060 8GB Upscaling enabled; other tier details not stated 1080p at 60 FPS with upscaling enabled
Path-tracing recommended Not specified by S-GAME NVIDIA GeForce RTX 5080 16GB Upscaling enabled; other tier details not stated 2160p at 60 FPS with upscaling enabled

The RTX 5060 and RTX 5080 entries are not replacements for the standard minimum or recommended profiles. S-GAME has not published a CPU pairing for either ray-tracing tier, so you should not infer that the processor requirements are identical to the conventional 1440p profile.

#1 Best Overall
WZP 4 PCS Wiper Blade Refill, 28 inch Cuttable Rubber Wiper Blade Inserts, Replace for Front Rear Windshield Wiper Baldes Strip, Universal for Most Vehicles (Black)
  • Durable Material: Made from premium rubber using a special process, it boasts excellent flexibility, water resistance, and abrasion resistance. Resistant to high and low temperatures, it is not prone to aging or deformation, ensuring long-lasting durability.
  • Precise Fit: Utilizing advanced technology to create a smooth, flat surface on both sides, combined with a 3D contour design, it fits snugly against the curved surface of the windshield. Easily wipes away rainwater, dirt, and debris, leaving no watermarks or residue, improving rearview mirror clarity.
  • Wide Compatibility: Each pack contains 4 frameless wiper blades (10.6 mm high x 6 mm wide), compatible with most frameless wipers on cars, buses, vans, trucks, and even boats. Can be cut to match the original wiper blade length.
  • Easy Replacement: Simply remove the old rubber blade, insert the new blade in reverse order, trim any excess length with scissors if necessary, and then reinstall it onto the wiper arm.
  • Reliable Performance: The soft yet durable rubber material ensures stable and reliable performance across a wide range of temperatures. Minimize friction, reduce operating noise, and extend service life. Note: Please ensure your windshield wipers are frameless before purchasing to ensure a perfect fit.

What the minimum specification means

The minimum configuration is built around 1080p output at 30 FPS, with an upscaler doing part of the performance work. It is therefore a target for playable entry-level settings rather than a promise of native 1080p rendering at a locked 30 FPS in every location.

Processor

S-GAME lists the Core i7-8700K and Ryzen 5 3600. Both are desktop processors from older generations, but the model names are more useful than a simple “quad-core” or “six-core” label: a processor that is below these examples may become the limiting component even if its graphics card meets the minimum GPU line.

Graphics card and VRAM

The minimum graphics examples are a GTX 1660 with 6GB of VRAM and an RX 5500 XT with 8GB. The different memory capacities show why comparing only the product family is insufficient. Check the exact model and its dedicated VRAM before assuming that a laptop or prebuilt version matches the desktop example.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Memory, operating system, API, and storage

  • RAM: 16 GB.
  • Operating system: 64-bit Windows 10 or Windows 11.
  • Graphics API: DirectX 12.
  • Storage: an SSD is required. S-GAME has not stated the installation capacity or a particular SSD model.

A hard-disk-only system does not satisfy the published storage requirement, even if its CPU and GPU appear fast enough. The requirements also do not establish whether a specific Windows edition, such as Home or Pro, is needed.

Rank #2
306 PCS Mixed Blade Car Fuses Assortment Kit, Auto Fuses for RV Truck Boat
  • Package Include: You will receive 2 pcs fuse puller, 2 pcs fuse tester, and 306 pcs automotive fuses. Including 90 standard sizes, 108 mini sizes and 108 low profile mini sizes, 9 models 2 A 5 A 7.5 A 10 A 15 A 20 A 25 A 30 A 35 A
  • Material: The rv fuses assortment kit is made of durable material with strong conductivity. It can quickly and accurately fuse the current and protect your car from overload and short circuit. Replace them anytime when fuse is blown
  • Easy to Identify: The blade fuse kit can quickly and clearly identify the amperage through color and coding markings, and the product box comes with a card indicating the rated current and quantity for easy identification
  • Practical Function: The automotive fuses assortment kit includes a circuit tester, fuse, and fuse puller, which greatly facilitates automotive repair, simplifies the troubleshooting process, and improves operational safety and efficiency
  • Application: The fuse kit contains a variety of sizes and is suitable for most vehicles. It is suitable for cars, trucks, RVs, SUVs, ATVs, multi-purpose vehicles, campers, motorcycles, boats, etc., to meet the protection needs of different circuits

What the recommended specification means

S-GAME’s standard recommended profile moves the target to 1440p at 60 FPS with upscaling enabled. It names a Core i5-10600K or Ryzen 5 5600X and either an RTX 3060 Ti 8GB or RX 6700 XT 12GB.

Why this is the practical target for most gaming PCs

This is the clearest profile for a conventional modern gaming setup: it is higher than the 1080p/30 minimum but does not require the specialized hardware listed for path tracing. If your monitor is 1440p, this tier is the relevant starting point, subject to the qualification that the frame-rate figure comes from S-GAME rather than an independent test.

VRAM is not interchangeable across the examples

The RTX 3060 Ti example has 8GB, while the RX 6700 XT example has 12GB. Those capacities should be recorded when you compare your own card. A card with a similar name but less VRAM, a laptop variant, or an older architecture may not deliver the same result. S-GAME has not published per-setting VRAM consumption, so there is no official basis for assigning a stricter memory threshold.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Ray tracing and path tracing requirements

S-GAME publishes separate targets for the more demanding lighting modes. The ray-tracing recommendation is an RTX 5060 8GB for 1080p/60 FPS with upscaling enabled. The path-tracing recommendation is an RTX 5080 16GB for 2160p/60 FPS with upscaling enabled.

Rank #3
Hugwits 28 Inch 4 PCS Windshield Wiper Blade Refill, DIY Adjustable Rubber Boneless Wiper Blade Strips Replacement, Universal for Most Cars, Trucks, SUVs
  • Universal 28 Inch Wiper Refills: This 28 inch wiper refill is designed for a universal fit across numerous vehicle models, providing a straightforward replacement solution for drivers of most cars, trucks, and SUVs.
  • DIY Adjustable Rubber Blades: Featuring a user-friendly, adjustable design, these rubber blades can be easily trimmed at home for a perfect custom fit, eliminating the need for specialized tools or professional installation.
  • Complete Front & Rear Replacement Set: The 4 pcs set contains sufficient refills to replace the blades on both the front and rear windshields of a vehicle at once, ensuring comprehensive visibility maintenance.
  • Durable Rubber Windshield Wiper Refills: Constructed from flexible, weather-resistant rubber material, these refills are engineered to maintain consistent contact with the windshield for effective sweeping in various conditions.
  • Value 4 PCS Refill Package: This package offers four individual 28 inch refills, presenting excellent value for maintaining multiple vehicles or keeping essential spares on hand for timely replacements.

Ray tracing

NVIDIA has announced PC-exclusive ray-traced reflections, shadows, and caustics, alongside DLSS 4 with Multi Frame Generation for launch day. The announcement confirms the features, but it does not quantify their frame-rate benefit. S-GAME’s RTX 5060 target should therefore be read as a developer pairing for the stated resolution and frame rate, not as evidence that every RTX 5060 system will hold 60 FPS in every scene.

Path tracing

Path tracing is assigned the much higher RTX 5080 16GB target at 2160p/60 FPS with upscaling. The specification does not state a CPU, graphics preset, exact path-tracing options, or expected VRAM usage. A processor that is adequate for the conventional recommended tier should not automatically be assumed to be suitable for this mode.

How to interpret the published frame-rate targets

The four figures—1080p/30, 1440p/60, 1080p/60 with ray tracing, and 2160p/60 with path tracing—are target outputs paired with upscaling. They are not native-resolution guarantees, laboratory benchmark results, or minimum frame rates.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

S-GAME has not described the test build, graphics preset, scene selection, upscaler mode, frame-time standard, or measurement method used to produce the targets. No independent launch-build benchmark was available before the game’s scheduled release. That means you should use the profiles to classify hardware, not to predict an exact average or a guaranteed one-percent-low result.

Rank #4
Qurbuns 4 PCS Wiper Blade Refills, 24" DIY Adjustable Windscreen Wiper Rubber Strips, Soft Rubber Strip Refills for Framless Windshield Wiper Blade, Universal for Car, Truck, SUV (Black)
  • Premium Material: The wiper blade refill is crafted from tough yet soft rubber—flexible, all-season compatible, resistant to high/low temperatures, waterproof, corrosion-resistant, easy to clean, and built for long-lasting use.
  • Superior Cleaning: Replaces old/damaged wiper blades to effectively wipe water mist/snow from glass, leaving no streaks—eliminates windshield blur, keeps rearview clear, enhances driving safety, and improves driver experience.
  • Easy Installation: Simple to install and disassemble without extra time/effort—remove wiper end cover, pull out old rubber, insert new strip in reverse order, trim if too long, and close the cover. Keep wet with water before installation for better fit.
  • Adjustable Design: Soft, trimmable wiper refills—adjust length to perfectly match your wiper. Note: Suitable for frameless wipers only, not compatible with metal-frame wipers.
  • Universal Compatibility: Fits most cars, vans, trucks, buses, and SUV windshields—ideal replacement wiper blade refills. Please check your original wiper size before purchasing to ensure compatibility.

What upscaling changes

With upscaling enabled, the game can render internally below the display resolution and reconstruct a higher-resolution image. The official profiles do not identify the internal resolution, quality mode, or upscaling technology used for each target. Consequently, “1440p/60 with upscaling” does not mean the GPU is rendering every pixel natively at 2560 by 1440.

Why scene-to-scene results can differ

Frame rate can vary with combat effects, the number of characters on screen, streaming activity, reflections, shadows, and other settings. Because S-GAME has not published a test methodology, the target should be treated as a broad expectation for an unspecified configuration rather than a promise that a particular demanding scene will never fall below the headline number.

Can your PC run Phantom Blade Zero?

Use this checklist to compare your computer with the official profiles without relying on a single “gaming PC” label.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
  1. Check Windows: Open Settings > System > About and confirm that the system type is 64-bit. The supported operating systems are Windows 10 and Windows 11.
  2. Check the processor: In the same About page, or in Task Manager’s Performance > CPU view, record the exact model. Compare it with the Core i7-8700K/Ryzen 5 3600 minimum examples and the Core i5-10600K/Ryzen 5 5600X recommended examples.
  3. Check the graphics card: In Settings > System > Display > Advanced display, or Task Manager’s Performance > GPU view, note the exact GPU and dedicated memory. Compare the model and VRAM, not just the brand or series number.
  4. Check RAM: Task Manager’s Performance > Memory panel should show at least 16 GB installed. The official requirement does not provide a separate 8GB or 32GB tier.
  5. Check DirectX: Press Win+R, enter dxdiag, and review the DirectX version shown by the diagnostic tool. The game requires DirectX 12.
  6. Check the installation drive: Confirm that the library location is an SSD. The developer requires solid-state storage but has not stated the game’s install size, so leave additional free space beyond the unknown package size and any platform update space.

If your system falls between the listed examples, the official information does not provide a reliable interpolation formula. You can identify which component is below the minimum class, but you cannot derive a guaranteed FPS figure from the published table.

Best Value
Sale
Pniwuno 4 PCS Wiper Blade Refills, 24" DIY Adjustable Rubber Windshield Wiper Refill Strips, DIY Cut to Size, Fit for Frameless Wiper Insert, Universal for Car, Truck, SUV
  • Premium Rubber Material: Crafted from high-quality natural rubber, this windshield wiper blade padding is ultra-soft, flexible, and rainproof, delivering streak-free wiping for a crystal-clear view, significantly enhancing your driving comfort and safety in all weather.
  • Adjustable & Customizable Fit: Available in multiple sizes for direct selection, and can also be easily cut to match the exact size of your original wiper blade, perfectly fitting most windshields of cars, buses, vans, lorries, and trucks; please confirm your wiper size before purchase for optimal fit.
  • All-Weather Safe Driving: Provides thorough, streak-free wiping even in heavy rain, snow, or moisture, eliminating blurred vision and worries about driving in harsh weather conditions, effectively boosting driving safety and giving you peace of mind on the road.
  • Universal Compatibility: Comes with 4 packs of windshield wiper rubber refills, designed to be a universal car accessory that fits most vehicles including cars, trucks, and SUVs, meeting your daily replacement and backup needs at great value.
  • Hassle-Free Installation: Super easy and quick to install and remove, no professional tools required, saving you time and labor costs; we recommend replacing the rubber strip every 6-12 months to extend the service life of your wiper blades and maintain optimal performance.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

Which component should you upgrade first?

Your situation Most relevant concern What the official information supports
Below 16 GB RAM Memory capacity Upgrade to at least 16 GB; both standard profiles specify that amount.
Game installed on a hard drive Storage type Move or install it on an SSD; an SSD is required.
GPU below GTX 1660/RX 5500 XT class Graphics performance and VRAM The system is below S-GAME’s minimum examples; an exact FPS outcome is not stated.
GPU around the minimum class but targeting 1440p/60 Graphics headroom The recommended examples are RTX 3060 Ti or RX 6700 XT; the minimum tier is only a 1080p/30 target.
Planning ray tracing Specialized GPU capability S-GAME lists an RTX 5060 8GB for its 1080p/60 ray-tracing target.
Planning path tracing at 4K High-end GPU capability S-GAME lists an RTX 5080 16GB for its 2160p/60 path-tracing target.

Do not buy an upgrade solely because a component is older. First compare your actual target—1080p/30, 1440p/60, ray-traced 1080p/60, or path-traced 2160p/60—with the corresponding official profile. The published data does not establish a universal upgrade requirement for every PC that sits between tiers.

Graphics settings and upscaling decisions

The official announcements do not publish named presets, recommended texture settings, internal render resolutions, frame-generation defaults, or a VRAM budget. Avoid guides that present those values as official unless S-GAME supplies them in a later update.

For a PC near the minimum, the defensible starting point is the 1080p target with the game’s supported upscaling option enabled. For a PC near the standard recommended profile, begin with the 1440p/60 target and keep upscaling enabled as specified by S-GAME. If you enable ray tracing or path tracing, compare your hardware against the separate GPU recommendations rather than treating those modes as a small toggle on the standard profile.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Once the game is available, use an on-screen frame-time or FPS monitor and test the areas that matter to you, such as heavy combat and crowded environments. That practical check will be more informative than converting the developer’s target into a guaranteed average.

Release date and announced PC features

S-GAME’s current official website displays October 29, 2026. In a June 2, 2026 developer letter on Steam Community, the studio said the game moved from September 9 to October 29. The Steam product listing showed October 28, 2026 on October 13, likely reflecting storefront or regional timing. Use October 29 as the developer’s stated release date and check your storefront near launch if the exact unlock hour matters.

NVIDIA announced DLSS 4 with Multi Frame Generation and PC-exclusive ray-traced reflections, shadows, and caustics for day one. Those announcements confirm intended features, not a measured performance uplift. In the delay letter, S-GAME also said it had spent additional effort preserving visual impact without relying on ray tracing. That is the studio’s design and optimization statement, not an independent image-quality or frame-rate assessment.

Important unknowns before launch

  • No official game-install size has been stated.
  • No CPU is specified for the ray-tracing or path-tracing profiles.
  • No graphics presets or exact upscaler modes are identified for the targets.
  • No VRAM consumption by setting is published.
  • No independent benchmark, launch-build frame-time result, or measured upscaling gain is available in the published material.

These omissions matter when planning a purchase. The requirements can tell you whether your PC is at, above, or below a named class, but they cannot predict exact frame pacing, visual quality, or the performance cost of each optional feature.

What’s actually slowing this PC down?

Pick the symptom - the matching free tool is one click away.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Pre-launch readiness checklist

  • Confirm Windows 10 or 11 is running in 64-bit mode.
  • Verify at least 16 GB of system memory.
  • Install the latest stable graphics driver available for your GPU before launch.
  • Reserve an SSD location and wait for the final installation-size disclosure.
  • Check that your GPU model and VRAM match the intended target tier.
  • Decide whether you want standard rendering, ray tracing, or path tracing before comparing hardware.
  • After release, test demanding scenes rather than relying only on the title-screen FPS.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.