iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
Usually, a mesh Wi-Fi system with multiple powered nodes uses more electricity than a single router, because each active node adds to the system’s draw. The actual difference depends on the models, the number of nodes left on, and whether power is measured at idle or during activity. There is no reliable universal percentage for mesh versus router.
How much power can extra mesh nodes add?
A 2024 California Lighting Technology Center report prepared for CalNEXT tested five mesh systems under controlled bench conditions. Compared with each system’s one-node idle draw, the two-node configurations used about 1.93 to 1.98 times as much total power. With three nodes, the totals were about 2.83 to 3.00 times the one-node figures. These are within-system comparisons from those tests—not a general ratio between any mesh system and any standalone router.
| Test configuration | Total idle power across five tested systems | Compared with each system’s one-node idle draw |
|---|---|---|
| Two nodes | 7.97–17.62 W | 192.60%–197.91% |
| Three nodes | 12.11–26.03 W | 282.57%–300.16% |
The report’s broader market assessment identified 60 products from eight manufacturers, but its controlled node-count results came from five tested systems. The average total power across those systems nearly tripled from one to three nodes in idle testing. The authors recommend adding nodes in stages as coverage requires, rather than powering every supplied unit automatically. Read the December 23, 2024 CalNEXT report.
Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Clear out junk files and repair common Windows errorsFree Scan →Why a single router-versus-mesh comparison can mislead
Count the whole setup
Compare a standalone router with the total draw of all mesh units that are powered—not one mesh node against a complete router setup. A two- or three-node system can draw more than a single unit simply because it has more energized devices.
#1 Best Overall
- Wi-Fi 6 Mesh Wi-Fi - Next-gen Wi-Fi 6 AX3000 whole home mesh system to eliminate weak Wi-Fi for good(2×2/HE160 2402 Mbps plus 2×2 574 Mbps)
- Whole Home WiFi Coverage - Covers up to 6500 square feet with seamless high-performance Wi-Fi 6 and eliminate dead zones and buffering. Better than traditional WiFi booster and Range Extenders
- Connect More Devices - Deco X55(3-pack) is strong enough to connect up to 150 devices with strong and reliable Wi-Fi
- Our Cybersecurity Commitment - TP-Link is a signatory of the U.S. Cybersecurity and Infrastructure Security Agency’s (CISA) Secure-by-Design pledge. This device is designed, built, and maintained, with advanced security as a core requirement
- More Gigabit Ports - Each Deco X55 has 3 Gigabit Ethernet ports(6 in total for a 2-pack) and supports Wired Ethernet Backhaul for better speeds. Any of them can work as a Wi-Fi Router
Match the measurement condition
Idle draw, power during data traffic, and maximum power are different measures. In the CalNEXT report’s traffic tests, power rose by an average of 44.3%; that is a study-specific result, not a forecast for every home. Its attenuation tests showed an average increase of 23.2%. Neither figure should be treated as a general household estimate.
Manufacturer specifications also use different conditions. TP-Link’s US 2025 table labels its figures as idle power: it lists the Archer A54 router at 2.86 W and shows 12.10 W for each Deco BE67 one-, two-, and three-pack row. The table describes idle power for each SNE device; do not read those pack-row figures as a measured total for every unit in a bundle. See TP-Link’s 2025 idle-power table.
Rank #2
- A New Way to WiFi: Deco Mesh technology gives you a better WiFi experience in all directions with faster WiFi speeds and strong WiFi signal to cover your whole home.
- Better Coverage than traditional WiFi routers: Deco S4 three units work seamlessly to create a WiFi mesh network that can cover homes up to 5, 500 square feet. No dead zone anymore.
- Seamless and Stable WiFi Mesh: Rather than wifi range extender that need multiple network names and passwords, Deco S4 allows you to enjoy seamless roaming throughout the house, with a single network name and password.
- Incredibly fast 3× 3 6 Stream AC1900 speeds makes the deco capable of providing connectivity for up to 100 devices.
- With advanced Deco Mesh Technology, units work together to form a unified network with a single network name. Devices automatically switch between Decos as you move through your home for the fastest possible speeds.
Separately, TP-Link lists 18.1 W maximum consumption without the power adapter for the Deco WB9600 two-unit package. A maximum figure is not typical continuous use and cannot be compared directly with an idle reading. See the Deco WB9600 specifications.
How to estimate the electricity cost for your setup
Use the average watts for the entire setup and your own electricity price. For continuous operation, convert watts to estimated annual energy with this calculation:
Rank #3
- 𝐃𝐞𝐜𝐨 𝟕 𝐒𝐮𝐩𝐞𝐫𝐜𝐡𝐚𝐫𝐠𝐞𝐝 𝐰𝐢𝐭𝐡 𝟒-𝐒𝐭𝐫𝐞𝐚𝐦 𝐁𝐄𝟓𝟎𝟎𝟎 𝐃𝐮𝐚𝐥-𝐁𝐚𝐧𝐝 𝐖𝐢𝐅𝐢 𝟕: Delivers up to 4324 Mbps (5 GHz) and 688 Mbps (2.4 GHz) speeds for 4K/8K streaming, AR/VR gaming, and more◇. Performance varies by conditions, distance to devices, & obstacles such as walls.
- 𝐒𝐞𝐚𝐦𝐥𝐞𝐬𝐬 𝐖𝐡𝐨𝐥𝐞-𝐇𝐨𝐦𝐞 𝐂𝐨𝐯𝐞𝐫𝐚𝐠𝐞: Covers up to 6,600 sq. ft. for over 150 devices with the option to expand anytime by adding another Deco router. All Deco routers work together.
- 𝐒𝐢𝐦𝐮𝐥𝐭𝐚𝐧𝐞𝐨𝐮𝐬 𝐖𝐢𝐫𝐞𝐝 & 𝐖𝐢𝐫𝐞𝐥𝐞𝐬𝐬 𝐁𝐚𝐜𝐤𝐡𝐚𝐮𝐥: Wi-Fi 7 and 2.5G Ethernet work together to balance traffic between Deco units for faster, more stable whole-home coverage. Backhaul requires at least two Deco units.§
- 𝐄𝐚𝐬𝐲 𝐒𝐞𝐭𝐮𝐩 & 𝐌𝐚𝐧𝐚𝐠𝐞𝐦𝐞𝐧𝐭: Set up and control your network in minutes with the Deco App. Keep your WiFi performing at its best by keeping the firmware updated through the App. All Wi-Fi routers require a separate modem. ⌂
- 𝐎𝐮𝐫 𝐂𝐲𝐛𝐞𝐫𝐬𝐞𝐜𝐮𝐫𝐢𝐭𝐲 𝐂𝐨𝐦𝐦𝐢𝐭𝐦𝐞𝐧𝐭 - TP-Link is a signatory of the U.S. Cybersecurity and Infrastructure Security Agency’s (CISA) Secure-by-Design pledge. This device is designed, built, and maintained, with advanced security as a core requirement.
Annual kWh = total watts × 8,760 ÷ 1,000
Then calculate:
Estimated annual cost = annual kWh × your price per kWh
For a mesh system, total the watts of all nodes that stay powered. If your only figure is an idle-power value, call the result an idle-based estimate: it does not account for traffic, variation in actual device use, or changes in your electricity tariff. This conversion estimates energy cost; it is not a prediction of a specific household’s measured bill.
Rank #4
- A New Way to WiFi: Deco Mesh technology gives you a better WiFi experience in all directions with faster WiFi speeds and strong WiFi signal to cover your whole home.
- Better Coverage than traditional WiFi routers: Deco S4 2 units work seamlessly to create a WiFi mesh network that can cover homes up to 3,800 sq. ft. No Dead Zone anymore.
- Seamless and Stable WiFi Mesh: Rather than wifi range extender that need multiple network names and passwords, Deco S4 allows you to enjoy seamless roaming throughout the house, with a single network name and password.
- Incredibly fast 3× 3 6Stream AC1900 speeds makes the deco capable of providing connectivity for up to 75 devices.
- With advanced Deco Mesh Technology, units work together to form a unified network with a single network name. Devices automatically switch between Decos as you move through your home for the fastest possible speeds
What the evidence can—and cannot—tell you
The CalNEXT results are controlled bench tests, not a survey of household bills. They show that additional powered nodes can substantially increase a mesh system’s total idle draw, and that activity affected power in the report’s tests. The report calls for further field testing to understand how real usage and different home environments affect performance and energy consumption. Available evidence does not establish a representative annual bill difference for all households or show that every mesh setup uses more electricity than every standalone router.
Should you turn off an extra mesh node?
If you can meet your coverage needs with fewer powered nodes, leaving an unnecessary unit off can reduce the system’s energy use. Add nodes as needed and check whether the remaining setup still covers the parts of the home where you need a reliable connection. Saving electricity is not useful if it leaves important rooms without adequate coverage.
Quick Recap
Best Value
- 𝐅𝐞𝐚𝐭𝐮𝐫𝐞-𝐑𝐢𝐜𝐡 𝐖𝐢-𝐅𝐢 𝐁𝐮𝐢𝐥𝐭 𝐭𝐨 𝐋𝐚𝐬𝐭: Get expansive whole-home coverage, fast Wi-Fi 7 speeds, and a future-ready 10G WAN/LAN port that stays ahead as your network grows. Ideal for both everyday users and performance-focused homeowners.
- 𝗩𝗮𝘀𝘁 𝗠𝗲𝘀𝗵 𝗖𝗼𝘃𝗲𝗿𝗮𝗴𝗲 & 𝗗𝗲𝘃𝗶𝗰𝗲 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆: The 3-pack mesh system covers up to a vast 7,600 sq.ft. and supports over 200 devices without compromising performance, ensuring seamless connectivity.
- 𝐁𝐄𝟏𝟎𝟎𝟎𝟎 𝐓𝐫𝐢-𝐁𝐚𝐧𝐝 𝐖𝐢-𝐅𝐢 𝟕 𝐒𝐩𝐞𝐞𝐝𝐬: Delivers up to 5,188 Mbps (6 GHz), 4,324 Mbps (5 GHz), and 574 Mbps (2.4 GHz) speeds for 4K/8K streaming, AR/VR gaming, and more. Performance varies by conditions, distance to devices, & obstacles such as walls.
- 𝗙𝗼𝘂𝗿 𝟮.𝟱𝗚 𝗪𝗔𝗡/𝗟𝗔𝗡 𝗣𝗼𝗿𝘁𝘀: Includes four 2.5G WAN/LAN ports and a USB 3.0 port, making it an ideal choice for future-proofing your home network.
- 𝐒𝐢𝐦𝐮𝐥𝐭𝐚𝐧𝐞𝐨𝐮𝐬 𝐖𝐢𝐫𝐞𝐝 & 𝐖𝐢𝐫𝐞𝐥𝐞𝐬𝐬 𝐁𝐚𝐜𝐤𝐡𝐚𝐮𝐥: Tri-band Wi-Fi 7 and 10G Ethernet work together to balance traffic between Deco units for faster, more stable whole-home coverage. Backhaul requires at least two Deco units.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
