iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
The HP1800 is a PWM phase-doubler that helps drive a described single-stage 48 V-to-ultra-low-voltage power topology. It turns one tri-state PWM input into four complementary outputs for two phases interleaved by 180 degrees. It is not a complete converter or the controller: the power stage, controller, drivers, switching devices and magnetic components are still required.
What the HP1800 does in a 48 V power system
In a conventional processor power path, an intermediate bus converter first reduces 48 V to 12 V; a multiphase buck point-of-load converter then steps 12 V down to the processor’s core voltage. Hynetek describes an alternative that removes the intermediate 12 V conversion stage: a single-stage half-bridge current-doubler rectifier (HBCD) converts the 48 V input directly to a low output voltage.
The HP1800 supplies signal logic for that arrangement. Its input is one tri-state PWM signal from an external multiphase controller; its four complementary outputs form two phases offset by 180 degrees. Hynetek says this arrangement can allow a controller used in a conventional second-stage design to drive the new topology without extra PWM channels. That does not mean the HP1800 performs the conversion itself or replaces the controller.
What else the topology needs
A functioning design still needs an external controller, gate drivers, switching devices, magnetic components and the supporting power circuitry. In Hynetek’s typical circuit, the HP1800 outputs drive an HP3010 half-bridge driver, rated by the manufacturer at 120 V/3 A, and an HP3000 dual-channel low-side driver, rated at 30 V/5 A. Those are parts of the example implementation, not components integrated into the HP1800.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
Hynetek describes ultra-low output applications spanning 0.6 V to 3.3 V and illustrates a 48 V-to-1.0 V application. The actual output capability, load current, transient performance and suitability for a particular processor depend on the complete circuit and its design; the stated voltage range alone does not establish those capabilities.
HP1800 specifications and signal behavior
| Item | Manufacturer-reported detail |
|---|---|
| Package | DFN2x2-8L, also described as DFN-8L |
| Maximum VCC | 7 V |
| Switching frequency range | 200 kHz–2 MHz |
| PWM input | Tri-state input; a high-impedance state is used to stop the PWM outputs |
| Initial dead time | Configurable independently for the complementary pairs using pull-down resistors at PWM1 and PWM4 |
| Operating temperature | -40°C to 125°C |
Hynetek also describes input transition and interference handling intended to reduce abnormal complementary timing and the risk of shoot-through. This is a described design feature, not a guarantee that faults cannot occur; it does not replace appropriate protection, layout work or validation of the finished power stage.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
How to interpret the efficiency and size claims
Hynetek’s 2026 article reports 90–92% peak efficiency at an operating point for single-stage conversion, approximately 86% typical end-to-end efficiency for the conventional two-stage path after distribution and parasitic losses, up to roughly 75% less active conversion area, and around 40% fewer components. The company does not provide a reproducible test setup, measured curves, load conditions or independent verification in the reviewed material. These are architecture-comparison claims, not guaranteed HP1800 performance or proof of results for a particular board.
Recommended Free Tools
A separate Hynetek article from 2025 described the two-stage path as approximately 87% efficient and single-stage efficiency as typically exceeding 90%. The differing rounded two-stage estimates—about 87% in 2025 and about 86% in 2026—should not be combined into a more precise figure. Neither source, on its own, establishes matched performance for a specific implementation.
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
What to compare before choosing an architecture
The single-stage approach may remove a conversion stage, but whether that helps a given system is an engineering question rather than a conclusion established by the published comparisons. Evaluate the complete design against the conventional path under comparable conditions:
- Measure 48 V-to-load efficiency across the intended input, load and operating range—not just at a peak operating point.
- Check output voltage, load-current capability and transient response against the processor’s requirements.
- Account for distribution losses, magnetic and other component count, and active board area in the actual layout.
- Confirm that the controller can provide the required tri-state PWM behavior and that its PWM-channel arrangement suits the phase-doubler topology.
- Evaluate switching frequency alongside thermal behavior, electromagnetic interference and the selected power-stage components.
- Review fault handling, protection, design complexity and the availability of validated reference designs for the intended implementation.
The published material does not provide matched, independent measurements across these factors. Resolve them with application-specific design work and validation rather than assuming the reported architecture-level benefits will carry over unchanged.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Bottom line
The HP1800 is a signal-logic enabler for a particular way to build a direct 48 V-to-low-voltage power path: it converts one tri-state PWM input into four outputs for two interleaved phases. It can help an existing multiphase controller support Hynetek’s described HBCD topology without adding PWM channels, but it is neither a complete converter nor evidence by itself that a finished design will meet efficiency, thermal, transient or protection targets.
The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Quick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
