What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
Playing with friends? Godlike.Host runs hosted Arma 3 servers from 10 data-center locations, with free DDoS protection.
BattlEye Extended Controls (BEC) is Windows server software that administers an Arma 3 dedicated server through BattlEye RCon. It is not a client-side mod. To set it up, enable BattlEye RCon first, place BEC on the same Windows machine (or another machine that can reach the RCon port), point Config.cfg at the active BattlEye directory, and start it with Bec.exe -f Config.cfg --dsc. Administrator accounts, command permissions, logs, filters, and restart warnings are then configured in their own files.
What BEC does—and what it does not do
BEC is a server-side control layer for BattlEye-protected Arma 3 servers. It connects to BattlEye’s RCon interface and automates tasks that the game server does not conveniently provide through its normal console: remote administration, scheduled messages, shutdown warnings, restart routines, chat and event logging, name and word filtering, anti-spam controls, lobby-idle kicks, slot limits, and whitelists.
Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallPlayers do not install BEC. The only required installation is on the Windows machine running the dedicated server, or on a separate Windows machine that can reach the server’s RCon endpoint. BEC cannot replace BattlEye; BattlEye must be operating and accepting RCon connections before BEC can connect.
The original developer’s official support and hosting ended in 2014. Current distributions are unofficial community forks, so file names, XML options, and supported Windows versions can differ. Use the sample files shipped with the fork you selected, verify its integrity, and test it against your current Arma 3 and BattlEye build before putting it into production.
#1 Best Overall
- Powerful Turbo Fan:CAGIWIRU Electric Air Duster have reached speed up to 130000RPM,Can efficient remove dust and debris.With LED light and Three Adjustable Speed to meet with different cleaning tasks.
- With Attached USB C Fasting Charging cable.Charing 3 hours,Enjoy up to 240 minutes of use on the lowest setting, For third speed can use for 25mins.with four charging options to meet with your needs.
- Wide Application:Upgraded attached 5 different nozzles,making it suitable for a variety of scenes, such as car,pet, pc, keyboards, and other electronic devices. It also serves for office and home clean duster.
- Handy Design & Portable:Cordless air duster electric nozzle is Light weight and small size, design and comfortable to hold and space saving, convenient to carry around. You can put it in your room or inside the car without taking up space.
- Warranty & Support: Our Electric air duster comes with 5 years warranty and 24/7 customer service. During this period, if you have any questions,pls kindly feel free to contact us.
Prerequisites and a safe installation plan
- A Windows Arma 3 dedicated server with BattlEye enabled.
- Administrator access to the server machine, or to the Windows account that owns the server files and starts BEC.
- The active BattlEye directory and the exact BattlEye configuration file used by the running instance.
- An RCon password and an unused RCon port that is reachable from the BEC process.
- A community BEC distribution containing
Bec.exe,Config.cfg, and the sample administration, command, and scheduler files. - A backup of the working server directory before changing BattlEye or BEC settings.
Keep the server, BattlEye, and BEC paths simple and permanent. Do not install BEC in a temporary download directory, and do not let a hosting panel silently move the BattlEye folder after you configure BePath. If BEC runs on another machine, replace the loopback address with the server’s reachable address and restrict the RCon port with a firewall rule or private network.
Self-hosting versus managed hosting
BEC is easiest when you control the Windows file system and process that launches the Arma 3 server. A managed provider can remove some operating-system work, but the provider must explicitly permit BEC and BattlEye RCon access; many panels hide or regenerate these files.
Free tools Windows power users keep installed
One-click scans. No signup required.
| Consideration | Self-hosted Windows server | Managed game hosting |
|---|---|---|
| Windows availability | You choose the Windows edition and updates. | Depends on the provider’s supported operating systems and game image. |
| BattlEye/RCon access | You can set the RCon password and port directly. | Confirm that RCon is enabled and that external or additional processes may connect. |
| File-path control | Full control over BePath, XML files, logs, and working directory. |
Paths may be fixed, virtualized, or changed by the panel. |
| Restart scheduling | Use BEC’s scheduler and Windows task or service tools. | The panel may provide its own restart system; avoid running two competing schedulers. |
| Support burden | You diagnose Windows, BattlEye, RCon, and BEC. | The provider may support the server but not an unofficial BEC fork. |
| Backups | You define and test backups of configuration, bans, and logs. | Check what is backed up and whether BEC files are included. |
| Program availability | You can install a compatible community build after checking its files. | Verify that the host allows the specific executable and persistent working directory. |
Step 1: identify the active BattlEye directory
Arma 3 installations commonly contain a BattlEye folder beside the server executable, but a startup parameter or hosting panel can select another location. The only directory that matters is the one used by the running server process. Check the server’s startup command, panel settings, and latest BattlEye log rather than assuming the first folder you find is active.
On a 64-bit Arma 3 server, the active file is often named BEServer_x64.cfg; older or differently packaged installations may use BEServer.cfg. Do not maintain conflicting RCon settings in both files and then guess which one BattlEye read. Edit the file that the running instance actually loads.
Step 2: enable and test BattlEye RCon
In the active BattlEye directory, create or edit the server configuration with an RCon password and port. The essential entries are:
Rank #2
- Screen Cleaner is Your Screen’s New Bestfriend! - EVEO is proud to present a screen cleaner that’s perfectly suited for your TV. Meet your new screen cleaner, computer screen cleaner, laptop cleaner, iPad cleaner, Macbook,tv cleaner or any other electronic device. Our screen cleaner spray and wipe along with the included plush microfiber cloth, easily removes dust, fingerprints & other smudges on the screen’s surface. Clean effectively for a streak-free screen
- Gentle on your Screens - Our screen cleaner spray and wipes is compatible to be used even for the most sensitive LCD, LED, CRT, and OLED screens in proper use. Be at ease knowing that this product is compatible with all the major brands: LG, SONY, Samsung, Sharp, iPad, iPhone, Android screens, Kindle, PC monitors - we’ve got you covered! Can be used as LCD screen cleaner, tv cleaner, smart tv screen cleaner, and more
- Premium Super Soft Plush Microfiber Cloth - Included in this efficient screen cleaning kit. This screen cleaner spray and wipe has our signature plush microfiber cloth specially designed to comply with screens and monitors and leave them streak-free. Has been shown to effectively absorbs stubborn stains, zero streaks, and no fiber shedding. Always use this together with our screen cleaner for the best results
- Easy-to-Use Screen Cleaner Kit + microfiber cleaning cloth - The EVEO Screen Cleaning Kit will easily be your new favorite tool when it comes to taking care of the things you love most, quick and easy solution for a streak-free screen. Simply screw on the sprayer gun on the screen cleaner bottle. Spray the cleaning liquid onto the microfiber cloth, then wipe the screen until desired cleanliness & shine is achieved.
- Quality Screen Care Kit Worth Purchasing - Enjoy a convenient Screen Cleaner anytime, anywhere you need it. Your satisfaction is our top priority. We stand behind the quality of our products and that’s why, you shouldn’t be worrying at all. We manufacture the Best Screen Cleaner. and can be used for laptop cleaning kit, laptop screen cleaner, tv screen cleaner for smart tv. MacBook screen cleaner, monitor cleaner or screen cleaner spray for electronic devices with microfiber cleaning cloth
RConPassword replace-with-a-long-unique-password
RConPort 23102310 is only an example. Choose a free port appropriate to your machine and firewall policy. The password is case-sensitive and must later match the value BEC uses. RCon is separate from the game’s player connection port, so do not automatically reuse the game port.
Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Repair Windows errors before they cause bigger problemsFix Now →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Create an empty bans.txt in that same active BattlEye directory if it does not already exist. BEC distributions commonly expect the file at startup, and a missing bans file is a documented cause of failure. Preserve any existing bans file; do not replace it with a blank file.
Restart the Arma 3 server after changing BattlEye settings, then inspect its BattlEye output for a successful RCon bind. If the port is already in use, select another port and update both the BattlEye file and BEC configuration. If a firewall is enabled, allow the chosen port only from the BEC host or trusted administration network.
Step 3: install BEC on the server machine
Download a maintained community BEC fork from a reputable project page and compare the archive contents with the project’s release notes. Because official support ended, check the fork’s Windows requirements, recent issue history, and whether its executable is compatible with your current BattlEye protocol. Keep the archive and a checksum outside the live directory so you can identify exactly what was installed.
Extract BEC to a dedicated folder, for example C:Arma3BEC. A practical layout is:
Rank #3
- 【Large size】：Measuring 800 x 300 mm/ 31. 5×12 inches, which is wider and taller than others. Large mouse pad can perfectly fit your keyboard and mouse of any size, and there is also ample space for peripherals such as phones, tablets, etc.
- 【LED backlight mouse pad】：Blade Hawks RGB mouse pad provides 7 static modes and 7 dynamic modes will give you the options you are looking for. Power-off memory function remembers the last lighting mode you selected. The super glow fiber Chroma will give you a colorful gaming setup that you want.
- 【Anti-slip rubber base】：Made from Natural rubber, this gaming mousepad will firmly grip your desktop, allowing you to enjoy the ultimate precision in the games you are most passionate about. It also comes with a texture that enhances this ability even further.
- 【Smooth and waterproof surface】: Micro-textured cloth surface, for extremely precise mouse control and a smooth movement. When liquid splashes on the gaming mouse pad, it forms water droplets and slides down. Will not delay your work or gameplay.
- 【Plug and play】: This mouse and keyboard pad is powered by USB, plug and play, no driver required. One button control light modes. Press one time to change the lighting mode, press twice to change the brightness, press and hold about 3 seconds turn ON/OFF.
C:Arma3BECBec.exe
C:Arma3BECConfig.cfg
C:Arma3BECAdmins.xml
C:Arma3BECCommands.xml
C:Arma3BECScheduler.xml
C:Arma3BECLogsYou can place the XML files in subdirectories, but every path in Config.cfg must then be changed to match. Run BEC with a Windows account that can read the BattlEye directory and write its log directory.
Step 4: configure Config.cfg
Open the sample configuration supplied by your fork and set the connection and file paths. A typical configuration uses entries like these; retain the exact section names and optional keys from your fork’s sample:
[Bec]
Ip = 127.0.0.1
Port = 2310
Password = replace-with-a-long-unique-password
BePath = C:Arma3serverBattlEye
Admins = Admins.xml
Commands = Commands.xml
Scheduler = Scheduler.xml
LogDir = Logs| Setting | What to enter | Common mistake |
|---|---|---|
Ip |
127.0.0.1 when BEC and Arma 3 share a machine; otherwise the server address reachable by BEC. |
Using a public address for a same-machine connection and then blocking the connection with the firewall. |
Port |
The exact number after RConPort in the active BattlEye file. |
Using the game port or leaving an old sample port unchanged. |
Password |
The exact value after RConPassword. |
Invisible whitespace, different capitalization, or a password copied from another server. |
BePath |
The full path to the active BattlEye folder, not the Arma 3 root and not the BEC folder. | Pointing at a second BattlEye directory that the server never loads. |
| XML and log paths | Valid paths to Admins.xml, Commands.xml, Scheduler.xml, and the log directory. |
Relative paths resolving from a different working directory than expected. |
Use fully qualified Windows paths while troubleshooting. If a path contains spaces, follow the quoting convention in the fork’s sample file. Keep the password out of screenshots, public repositories, and shared batch files. If BEC is on a different host, never expose RCon to the entire internet merely to make the connection work.
Step 5: start BEC with the documented flags
Open Command Prompt in the BEC directory and run:
Bec.exe -f Config.cfg --dscThe -f Config.cfg argument explicitly selects the configuration file, while --dsc is included in the community launch instructions. Starting from the BEC working directory helps relative XML and log paths resolve consistently.
For repeatable starts, create StartBEC.bat beside Bec.exe:
Rank #4
- 【Softer and More Comfortable】Vaydeer wrist rest has unique diamond pattern, which is the combination of softness and aesthetics. The materials of wrist rest are improved into higher quality memory foam and covered with silky smooth lycra. The computer wrist rest makes you as comfortable and cushiony as like rest your wrists on clouds.
- 【Ergonomic Wrist Saver】The wrist rests for keyboard and mouse comes with a 17.32×3.15×0.83 inch keyboard wrist pad and a 5.94×3.15×0.83 inch mouse wrist support. Based on ergonomic design, the unique concave shape is the perfect fit for your wrist joints. The wrist rest pad fits most computer keyboards and laptops, improve hand and wrist posture, release your wrist and arm stress.
- 【Non-Slip Rubber Bottom】Featuring an anti-skid silicone base on the bottom, this wrist keyboard support stays firmly in place on your desk, preventing the padding from sliding around, ensuring stable and consistent wrist support during extended computer sessions.
- 【Better Experience & Pain Relief】Our keyboard arm rest is beneficial to alleviate the soreness caused by direct contact and friction between your arm and a hard desk surface, reducing the risk of wrist fatigue or carpal tunnel. The soft texture of memory foam can evenly distribute the pressure around your wrists and provide good support with just enough give.
- 【Helpful in Multiple Scenarios】Whether you're working, studying, writing, typing, gaming, this keyboard and mouse rest combo is an essential accessory to add comfort and support to your hands and wrists. It’s also a great gift for men, women, family, friend, coworker, gamer, teacher, etc.
@echo off
cd /d C:Arma3BEC
Bec.exe -f Config.cfg --dscUse the same command in a shortcut’s target field or in a Windows task that starts after the server. Set the shortcut or task’s “Start in” directory to the BEC folder. If the Arma 3 server itself is launched by a panel or service, make sure BEC starts only after BattlEye has created its live files; otherwise BEC may report a missing file or refuse the RCon connection. Keep the BEC console and first log open during the initial test.
Step 6: define administrators and command permissions
Admins.xml identifies trusted administrators and assigns them to groups. Commands.xml maps command groups to the operations those groups may run. Use the XML templates supplied with your fork because identifier formats and element names are not identical across community versions.
- Make a backup copy of the sample files before editing.
- Add one test administrator using the identity format documented by the fork, commonly a BattlEye or player identifier rather than a display name.
- Assign that identity to a narrowly scoped group first. Grant broad commands only after the connection and audit trail work.
- Define which commands each group may use in
Commands.xml; do not assume that membership alone grants every command. - Restart BEC after XML changes unless the fork documents live reload, then test a harmless command and confirm it appears in the log.
Display names can change and can be duplicated, so they are a poor sole identity. Treat the administrator file as a credential list: restrict filesystem permissions, remove former staff promptly, and keep a dated backup. Never paste real passwords or identifiers into public support posts.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Step 7: turn on logs, filters, and server protections
BEC can write chat and event logs and can apply name filters, word filters, anti-spam rules, lobby-idle kicking, slot limits, and whitelists. Enable only the controls you understand, then test them with a private player or test session. Overly broad word filters can block legitimate usernames or mission text; aggressive anti-spam settings can punish scripted mission messages.
Choose a log directory on a volume with sufficient space. Rotate or archive logs so a busy server does not fill the disk. Restrict access because chat and administrative logs can contain player identifiers and staff actions. When investigating a kick or command failure, record the UTC time, player identity, BEC log entry, and corresponding BattlEye log entry before deleting or rotating files.
Best Value
- 【No Drill Mounted】Cable management tray can be assembled in as little as 3 minutes or less-simply. Side clips easily clampe the edge of desk, pass through the holes on the sides, and secure excess cables with baskets. Desk cable management supports inward or outward installation to meet your needs in different scenarios, and provides you with great convenience when collecting and organizing wires.
- 【Rubber Pad Protects Desk】Wire organizer under desk built-in soft rubber pads on the clamp protect your desk from scratches, so you will not damage your furniture or office.
- 【Sturdy and Beautiful】Cord management under desk is made of high-quality carbon steel and holds about 15 lbs. The wire basket has 2 holes on each side of the tray to enable your cables to pass freely. Cable baskets are suitable for desk thickness use from 0.4" to 2.4".
- 【Space Saving & Keep Organized】Desk cable management tray holds all your power cords, outlet strips, USB hubs and computer transformers hidden from your feet, and the data cables will not enter the vacuum cleaner to keep your desk clean and tidy. Desk wire organizer is also suitable for use in the kitchen and outdoors.
- 【Reduce Safety Risks】Cable tray under desk keeps all plugs away from your kids, no more worry about tripping. Using 2 holes wire tray saves extra space, helps you easily cabling and wire protection. The mesh design is not easy to accumulate dust, but avoids safety accidents caused by messy wires.
Step 8: schedule warnings and restarts with Scheduler.xml
The scheduler file controls automated messages and shutdown or restart warnings. Start from the sample Scheduler.xml shipped with your fork rather than inventing a new XML schema. Add a sequence of announcements that gives players time to finish a mission, followed by the shutdown or restart action supported by your server setup.
- Copy the sample scheduler file and confirm BEC can read it with no XML syntax errors.
- Set the schedule’s times and recurrence according to the fork’s documented format, including its timezone convention.
- Add several warnings—for example, a notice well before the event, then shorter intervals as the restart approaches.
- Use the exact shutdown or restart command expected by your Arma 3 server or hosting panel. Do not run both BEC and a panel scheduler for the same event.
- Test the schedule during a maintenance window. Verify that messages reach the server, the final action occurs, and the server starts again with BattlEye and BEC in the intended order.
Do not treat sample times or paths as universal defaults. Daylight-saving changes, the host’s timezone, and a panel’s restart policy can shift the observed time. Put the timezone and next planned restart in your staff documentation.
Verify the complete connection
A successful BEC console window alone is not enough. Verify the entire chain:
- The Arma 3 server is running with BattlEye enabled.
- The active BattlEye file contains the expected RCon port and password.
bans.txtexists in that same BattlEye directory.- BEC’s
Ip,Port,Password, andBePathmatch the live server. - BEC loads each XML file and creates its log output.
- A test administrator can authenticate and run one permitted, non-destructive command.
- A test chat message or event appears in the expected log.
- A temporary scheduler entry produces a warning, then is removed or replaced with the real schedule.
After testing, stop BEC cleanly, restore the intended schedule, and document the launch command, paths, RCon port, backup location, and the person responsible for credential rotation.
Troubleshooting BEC startup and RCon connections
| Symptom | Likely cause | Fix |
|---|---|---|
| BEC reports that a bans file is missing. | bans.txt is absent from the active BattlEye directory. |
Create the file there, preserve its permissions, and restart BEC. |
| BEC cannot connect. | Wrong BePath, port, password, address, firewall rule, or BattlEye instance. |
Compare every value character-for-character, confirm the server is listening on the RCon port, and test locally with 127.0.0.1 when appropriate. |
| Connection works only when launched manually. | The batch file or shortcut has the wrong working directory or a relative path. | Use cd /d, set “Start in” to the BEC folder, and use absolute paths while diagnosing. |
| XML settings are ignored. | Malformed XML, wrong file path, or an option unsupported by the selected fork. | Restore the fork’s sample, validate one change at a time, and read the BEC startup log for the file it loaded. |
| Administrators authenticate but commands fail. | The identity is in the wrong group or the command is not permitted in Commands.xml. |
Check group membership and command permissions, then restart BEC if the fork does not support reload. |
| Scheduled messages appear at the wrong time. | Timezone, daylight-saving, or scheduler-format mismatch. | Confirm the host timezone and the fork’s scheduler convention; test a near-future entry before restoring the recurring schedule. |
| BEC works until the server restarts. | BEC is not launched again, or it starts before BattlEye is ready. | Use a batch file, shortcut, task, or service with a deliberate startup order and verify the post-restart logs. |
Security and maintenance checklist
- Use a unique, long RCon password and rotate it when an administrator leaves.
- Expose the RCon port only to the BEC host or a trusted management network.
- Keep BEC, Arma 3, and BattlEye under separate backup routines so an update can be rolled back.
- Review the community fork’s release notes before replacing
Bec.exe; keep the previous executable until the new one passes a test restart. - Back up
Admins.xml,Commands.xml,Scheduler.xml, bans, and filters, but store credentials separately from general server backups. - Monitor disk space for BEC and BattlEye logs and archive them on a defined retention schedule.
- Re-test RCon, an administrator command, filters, and a scheduled warning after every BattlEye, Arma 3, Windows, or hosting-panel change.
When the path, credentials, and launch order are correct, BEC remains a small, predictable control process: BattlEye supplies the RCon endpoint, BEC supplies administration and automation, and the separate XML files define who may act and when the server should warn or restart.
Do these 3 things before closing this tab:
1Clear out junk files and repair common Windows errors2Scan for outdated or missing drivers - takes under a minute3Repair Windows errors before they cause bigger problemsQuick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
