iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
To play records through a Bluetooth speaker, first put the speaker into its own Bluetooth pairing mode, then hold the AT-LP60XBT wireless-function button for about two seconds while the devices are within 1 m (3.3 ft). The turntable flashes red and blue while searching and lights blue when pairing succeeds. The pairing window lasts 30 seconds.
You do not need to change the PHONO/LINE switch for Bluetooth. That switch is used for the wired RCA connection. Before pairing, assemble the platter and belt, install the felt mat, connect the AC adapter, and place the turntable on a level surface.
What you need before pairing
The AT-LP60XBT sends audio to a Bluetooth receiver. In this setup, the receiver is normally a Bluetooth-compatible active speaker: a speaker with its own amplifier and Bluetooth audio input. A phone, tablet or computer that only transmits Bluetooth audio is not a substitute for a receiving speaker.
Recommended Free Tools
- An assembled Audio-Technica AT-LP60XBT turntable with its AC adapter connected.
- A powered Bluetooth speaker that supports Bluetooth audio reception.
- The speaker’s instructions, because the button or menu used to enter pairing mode differs by model.
- A record, with the turntable placed on a stable, level surface.
For a direct wired connection, use powered speakers or another device with an appropriate audio input. Passive speakers cannot be connected directly to the turntable without an amplifier or powered speaker system. Check the labels on the speaker before you start: Bluetooth capability alone is not enough if the product is not designed to receive an audio stream.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
Have the speaker close to the turntable for the initial setup even if you intend to place it across the room later. Audio-Technica specifies a maximum pairing distance of 1 m (3.3 ft) for the pairing procedure. Keeping the first attempt short removes distance as a variable when you are checking the indicator lights.
Assemble and prepare the AT-LP60XBT
Bluetooth pairing cannot compensate for a belt or platter that has not been installed correctly. Complete the mechanical setup before troubleshooting wireless audio. A successful Bluetooth connection only proves that the wireless link is established; the platter still has to rotate and the stylus still has to contact the record.
Install the platter and belt
- Place the platter on the turntable spindle.
- Loop the drive belt around the correct belt path and the motor pulley. The belt’s ribbon is provided to help with installation; use it to position the belt, then remove the ribbon completely.
- Put the felt mat on top of the platter.
- Connect the supplied AC adapter and set the turntable on a level surface.
If the belt routing is unclear, use the diagrams in Audio-Technica’s playback setup guide. A belt left on the ribbon or routed incorrectly can prevent normal platter rotation even though Bluetooth pairing appears successful. Do not start a record until the platter is seated and the mat is in place.
Level placement is part of setup, not an optional finishing touch. Put the deck on a stable surface rather than moving it while the tonearm is operating. Connect the AC adapter before beginning the pairing sequence so the wireless function and the automatic mechanism have power throughout the test.
Pair the turntable with a Bluetooth speaker
1. Put the speaker into pairing mode
Turn on the speaker and activate its Bluetooth pairing mode using the speaker’s controls. Some speakers use a Bluetooth button; others require selecting Bluetooth from an input button or menu. The speaker’s manual is the authority for this step. Make sure it is ready to accept a new audio source rather than waiting for the turntable to receive music from a phone.
Simply switching the speaker on is not always the same as making it discoverable. If the speaker is already connected to another source, disconnect that source or follow the speaker manufacturer’s procedure for accepting a new device. The AT-LP60XBT cannot force a speaker to abandon an existing connection.
2. Bring the devices close together
Place the speaker within 1 m (3.3 ft) of the turntable while pairing. This is the distance specified in Audio-Technica’s US user manual for the pairing procedure. You can move the speaker farther away after the connection is established, subject to the speaker, regional model and room conditions.
Free tools Windows power users keep installed
One-click scans. No signup required.
Keep the turntable and speaker in the same open area during the first attempt. A clear, short path makes it easier to distinguish a pairing-mode problem from a range or interference problem. Once the blue connection indication appears, test playback before choosing the speaker’s final location.
3. Start pairing on the AT-LP60XBT
- Confirm that the turntable’s AC adapter is connected.
- Press and hold the turntable’s wireless-function button for about two seconds.
- Watch the wireless indicator. Alternating red and blue flashes mean the turntable is searching for a receiver.
- Wait for the indicator to illuminate blue. A blue light indicates that pairing has completed.
The turntable stays in pairing mode for 30 seconds. Audio-Technica’s manual states: “The product stays in the pairing mode for 30 seconds.” If the speaker does not connect within that period, put the speaker back into pairing mode and repeat the turntable sequence. Do not assume that a red-and-blue pattern means the connection is already complete; it means the search is still in progress.
For the complete button sequence and indicator behavior, see the AT-LP60XBT user manual. If your regional manual uses a different illustration or control label, follow the documentation supplied with your unit.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Play a record after pairing
- Remove the stylus protector by pulling it horizontally, following the direction shown in the setup documentation. Do not twist the stylus assembly.
- Place the record on the platter.
- Set the record-size selector to the record’s size.
- Set the speed selector to 33-1/3 or 45 RPM, as required by the record.
- Press START. The fully automatic mechanism moves the tonearm to the record and begins playback.
When the record finishes, the automatic mechanism returns the tonearm. If the speaker is paired but no sound is heard, check the speaker’s selected input and volume before repeating Bluetooth setup. A blue wireless indicator does not replace the normal record-playing steps: the stylus protector must be off, the correct size and speed must be selected, and START must be pressed.
If the platter does not rotate, stop and revisit the belt installation rather than repeatedly pairing. Bluetooth status and platter drive are separate parts of the setup. Likewise, if the record starts but the speed is wrong, check the speed selector rather than the wireless connection.
Understand the indicator lights and timing
| Turntable indication | Meaning | What to do |
|---|---|---|
| Alternating red and blue flashes | The turntable is searching for a Bluetooth receiver. | Keep the speaker in pairing mode and within 1 m (3.3 ft). Complete the process within 30 seconds. |
| Blue illumination | Pairing has completed. | Start the record and select the speaker’s Bluetooth input if it has multiple inputs. |
| No successful connection before 30 seconds | The pairing window has expired. | Re-enter pairing mode on the speaker, then hold the turntable wireless button for about two seconds again. |
The 30-second period is a practical limit, not a reason to rush the record setup. Prepare the speaker first, then begin the turntable sequence so the receiver is already listening when the red-and-blue search starts. If you need to read the speaker’s instructions or move equipment, cancel the attempt by returning the speaker to pairing mode and start a fresh cycle.
Why the PHONO/LINE switch does not change Bluetooth pairing
Leave the PHONO/LINE selector alone when using Bluetooth. Audio-Technica’s pairing instructions do not require changing it for the wireless connection. The selector affects the signal on the RCA outputs; it is not a Bluetooth pairing control.
The selector matters for the alternative RCA connection. The AT-LP60XBT has a built-in phono equalizer, so it can provide a line-level signal to powered speakers or another line input. Set the output to match the input on the receiving equipment:
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
| Receiving input | PHONO/LINE setting | Connection |
|---|---|---|
| LINE, AUX or another line-level input | LINE | Connect the turntable’s RCA cable to the equipment’s line input. |
| PHONO input on an amplifier or receiver | PHONO | Connect the RCA cable to the dedicated phono input. |
Use the labels on your equipment and the connection table in the official manual. Choosing PHONO for a line input, or LINE for a phono input, can produce an incorrect level or tonal balance. If Bluetooth is your only connection, changing this selector will not make the speaker discover the turntable and is not a remedy for red-and-blue flashing.
Bluetooth versus RCA: which connection should you use?
| Consideration | Bluetooth | RCA wired |
|---|---|---|
| Receiver requirement | Bluetooth audio receiver, normally an active speaker. | Powered speaker, amplifier or other equipment with a suitable RCA input. |
| Cables | No audio cable between turntable and speaker. | RCA cable required. |
| Initial setup | Speaker must be placed in pairing mode; turntable pairing lasts 30 seconds. | Connect the cable and match PHONO/LINE to the receiving input. |
| Placement | More flexible after pairing; wireless range depends on the model and environment. | Limited by cable length and equipment placement. |
| Best fallback when pairing fails | Repeat pairing with both devices close together. | Use powered speakers or a compatible amplifier and the correct output setting. |
Bluetooth is the simplest route when the speaker is already a compatible receiver and you want to avoid a cable. RCA is predictable when the speaker has an accessible line input or when wireless pairing is unreliable. Neither path makes passive speakers self-powered: a passive pair still needs an amplifier or powered speaker system.
For Bluetooth, codec support and practical range depend on the turntable variant, speaker and room. For RCA, the main setup decision is signal level: LINE for a line-level input and PHONO for a dedicated phono input. Choosing between them is therefore mostly a question of the receiver’s inputs and the placement you want, not a change to the record player itself.
Troubleshoot pairing and playback
The speaker does not appear to connect
- Confirm that the speaker is genuinely in Bluetooth pairing mode, not merely powered on or connected to another source.
- Move the speaker to within 1 m (3.3 ft) of the turntable.
- Hold the AT-LP60XBT wireless-function button for about two seconds and look for alternating red and blue flashes.
- Complete the process before the 30-second pairing window closes.
- If the window expires, restart pairing on the speaker and repeat the turntable sequence.
Perform the sequence in that order. Starting with the turntable while the speaker is only powered on can leave the turntable searching without a receiver ready to accept it. A fresh attempt should begin with the speaker, followed by the close-range placement and the two-second wireless-button hold.
The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →The indicator flashes red and blue but never turns blue
Those flashes show that the turntable is searching; they do not confirm that the speaker has accepted the connection. Recheck the speaker’s pairing procedure and make sure it is operating as a Bluetooth audio receiver. Keep both devices close during the retry and remove any competing connection from the speaker if its manual requires that.
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
If the 30-second window ends, the absence of blue is expected. Put the speaker into pairing mode again rather than waiting indefinitely, then initiate a new turntable search. Avoid changing PHONO/LINE as a response to this light pattern; that switch concerns RCA output.
The speaker paired previously but will not reconnect
The turntable can remember up to eight receiver devices, and pairing is normally retained. Audio-Technica says that pairing again may be necessary if the receiver deleted the turntable from its connection history, if the turntable was repaired, or if more than eight devices have been paired. In those cases, put the speaker into pairing mode again and repeat the 30-second procedure.
Memory capacity is about saved receiver relationships, not a promise that every speaker will reconnect automatically in every situation. If a speaker has been reset or its saved-device list was cleared, treat it as a new pairing. If the turntable has already been paired with eight receivers, adding another may require pairing again according to the manual’s guidance.
The light is blue but there is no sound
- Verify that the record is on the platter and that the stylus protector has been removed.
- Check the record-size and speed selections, then press START.
- Raise the speaker’s volume and select its Bluetooth input if it has multiple inputs.
- Check that the platter belt is installed correctly and the platter rotates.
A blue light identifies a completed Bluetooth pairing, not a guarantee that the speaker is audible at its current volume or input. Work through the record controls and speaker controls separately. If the platter and tonearm operate normally but the speaker remains silent, recheck the speaker’s selected source before deleting and re-pairing devices.
The turntable connects to a phone but not the speaker
The AT-LP60XBT is intended to transmit record audio to a Bluetooth receiver. A phone or computer may be configured primarily as a Bluetooth transmitter, so it may not accept the turntable’s audio stream. Use a speaker or audio system that explicitly supports Bluetooth audio reception.
This distinction explains why a phone can be visible in a Bluetooth menu yet still be unsuitable for this setup. The receiving product must be the endpoint that plays the turntable’s audio, normally a Bluetooth-compatible active speaker or another audio system designed to receive Bluetooth.
Should you factory-reset the turntable?
The cited pairing section of the manufacturer’s manual does not document a factory-reset procedure. Do not rely on unofficial button-hold combinations as if they were Audio-Technica instructions. If the manual-supported pairing steps fail, consult the speaker manual and Audio-Technica’s regional support channel.
Start with documented actions: make the speaker discoverable, move it within 1 m, hold the wireless button for about two seconds, and repeat before the 30-second timeout. A reset sequence found elsewhere may apply to another model or regional version and should not be treated as a guaranteed AT-LP60XBT procedure.
Range, codecs and regional specifications
Audio-Technica’s Japanese AT-LP60XBT WW page lists Bluetooth 5.0, A2DP, Qualcomm aptX Adaptive, aptX and SBC codecs, and a maximum range of 10 m in clear line of sight. Those figures are specifications for the WW regional variant, not a guarantee for every market version or every room. Walls, interference, antenna placement and the speaker’s own Bluetooth implementation can reduce practical range.
The 10 m figure should not be confused with the 1 m pairing instruction. Use 1 m or less for the initial connection because that is the manufacturer’s pairing guidance. Afterward, the usable distance depends on both devices and the environment. A clear line of sight is a specification condition, not a promise that a signal will travel 10 m through walls or crowded wireless surroundings.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
The broader Audio-Technica product information also describes aptX support, RCA connectivity, automatic playback at 33-1/3 and 45 RPM, and a switchable built-in preamp. Check your unit’s regional documentation because model names, included accessories and listed wireless capabilities can vary by market. The relevant manufacturer pages are Audio-Technica Japan’s AT-LP60XBT WW specifications and Audio-Technica India’s product information.
PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteCodec labels describe supported transmission formats; they do not remove the need for a compatible receiver. The speaker must still support Bluetooth audio reception, and its own implementation determines which compatible format is used. If your regional manual lists different wireless details, follow that documentation for your unit instead of assuming the WW specification applies unchanged.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.A reliable repeatable setup checklist
- Platter installed.
- Belt routed around the motor pulley and its ribbon removed.
- Felt mat installed.
- Turntable level and AC adapter connected.
- Powered Bluetooth speaker switched on and placed in Bluetooth pairing mode.
- Speaker within 1 m (3.3 ft) for the initial pairing.
- Wireless-function button held for about two seconds.
- Red/blue search flashes observed, followed by blue when connected.
- Pairing completed within 30 seconds.
- Stylus protector removed, record size and speed selected, and START pressed.
Use the checklist from top to bottom when helping another listener set up the deck. It separates physical preparation, receiver preparation, wireless pairing and record playback. That makes it easier to identify whether a problem is mechanical, a speaker-mode issue, an expired pairing window or a playback-control mistake.
When to choose the wired fallback
Use RCA instead of Bluetooth when your speaker has a suitable line input, when you need a connection that does not depend on wireless pairing, or when the speaker is outside reliable Bluetooth range. Connect the supplied RCA cable, select LINE for an AUX or line input, and select PHONO only for a dedicated phono input. The built-in phono equalizer means a separate phono preamp is not required for a powered-speaker connection configured as a line-level output.
Do not connect the turntable directly to passive speakers. They need amplification, either from powered speakers or from an amplifier/receiver that accepts the selected output. If the receiving equipment has both PHONO and LINE inputs, use the setting that matches the input you actually chose. The RCA route is a fallback for the same record player, not a reason to change the Bluetooth pairing procedure.
Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Clear out junk files and repair common Windows errorsFree Scan →A powered bookshelf speaker with RCA input is a practical wired alternative. Audio-Technica shows the AT-SP3X in connection with the turntable, but it is an example rather than a required pairing match. Choose any receiving equipment whose power and input arrangement suit the connection you intend to make.
Frequently asked questions
Do I change PHONO/LINE before pairing Bluetooth?
No. Leave the selector unchanged for Bluetooth. It controls the RCA output path; use it only when matching the turntable to a PHONO or LINE input by cable.
What does flashing red and blue mean?
It means the AT-LP60XBT is searching for a Bluetooth receiver. Keep the speaker in its own pairing mode, within 1 m (3.3 ft), and finish within 30 seconds. Blue illumination indicates that pairing has completed.
How close should the speaker be?
Place it within 1 m (3.3 ft) during pairing. The Japanese WW specification lists a maximum 10 m range in clear line of sight for that regional variant after connection, but actual range varies with the room and equipment.
Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Repair Windows errors before they cause bigger problems3Scan for outdated or missing drivers - takes under a minuteHow many Bluetooth receivers can the turntable remember?
Audio-Technica specifies memory for up to eight receiver devices. Pair again if the receiver erased the turntable, the turntable was repaired, or more than eight devices have been paired.
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Can I connect passive speakers directly?
No. Use a powered Bluetooth speaker for wireless playback, or connect the RCA output to powered speakers or an amplifier/receiver with a suitable input.
Why is there no sound after the light turns blue?
Check the speaker’s volume and selected input, remove the stylus protector, confirm the record size and speed, press START, and verify that the belt is installed and the platter rotates.
Is a separate phono preamp required for powered speakers?
Not for the line-level RCA setup described here. The AT-LP60XBT has a built-in phono equalizer; set the selector to LINE when connecting to an AUX or other line input.
Is there an official factory-reset button sequence?
The cited pairing section does not document one. Use the documented pairing steps and consult the turntable’s regional support channel and the speaker manual rather than relying on unofficial combinations.
Bottom line
Set up the platter and belt first, put the powered speaker into its own Bluetooth pairing mode, then hold the AT-LP60XBT wireless button for about two seconds with the devices within 1 m. Red-and-blue flashing means searching; blue means paired. Leave PHONO/LINE unchanged for Bluetooth, and use that switch only when making the RCA connection.
Frequently Asked Questions
Do I need to change the PHONO/LINE switch for Bluetooth?
No. Leave it unchanged for Bluetooth. The switch is used to match the RCA output to a PHONO or LINE input.
What does the AT-LP60XBT red-and-blue flashing light mean?
The turntable is searching for a Bluetooth receiver. Keep the speaker in pairing mode and within 1 m (3.3 ft), and complete pairing within 30 seconds.
Windows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallCrashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteWhy will my Bluetooth speaker not connect?
Put the speaker into its own pairing mode, move it within 1 m of the turntable, hold the wireless-function button for about two seconds, and retry before the 30-second window expires.
Can the AT-LP60XBT connect directly to passive speakers?
No. Use a powered Bluetooth speaker or connect the RCA output to powered speakers or an amplifier/receiver.
How many Bluetooth devices can the turntable remember?
Up to eight receiver devices. Pair again if the receiver deleted the turntable, the turntable was repaired, or more than eight devices have been paired.
What should I check when the light is blue but there is no sound?
Check the speaker input and volume, remove the stylus protector, select the correct record size and speed, press START, and verify that the belt and platter are operating.
The Bottom Line
Put the speaker in pairing mode first, keep it within 1 m, then hold the AT-LP60XBT wireless button for about two seconds. Red-and-blue flashes mean searching; blue means paired. PHONO/LINE matters only for RCA wiring.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
