Recommended: Fix Windows Errors and Clear Junk Files in Minutes - Free Scan →Recommended: Crashes or Glitches? A Free Driver Scan Usually Finds the Culprit →Recommended: PC Feels Slow? A Free Scan Shows What's Dragging Windows Down →
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
Yes—one DisplayPort connection can carry independent video streams to multiple monitors using Multi-Stream Transport (MST). Connect compatible monitors in a daisy chain, or connect an MST hub to the computer and attach each monitor to the hub. The computer, connection path, operating system, and chosen display modes must all support the setup; a basic splitter that mirrors a signal will not create separate desktops.
How one DisplayPort connection drives multiple screens
DisplayPort MST lets a compatible source send multiple display streams through one link. The streams share that link’s capacity, so the number of screens and the resolution and refresh rate available on each depend on the specific computer, connection hardware, monitors, and display settings.
VESA’s 2014 announcement for DisplayPort 1.3 described two 3840 × 2160 (4K UHD) displays simultaneously for specified VESA Coordinated Video Timing and uncompressed modes. That standards capability is not a promise that every computer, hub, or monitor can run two 4K screens at any refresh rate. VESA’s current FAQ lists a maximum DisplayPort 2.1b payload of 77.37 Gbps; that link figure likewise does not establish support for a particular device combination. See VESA’s DisplayPort FAQ and its DisplayPort 1.3 announcement.
Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Choose a connection method
Daisy-chain monitors
Run a cable from the computer’s DisplayPort output to the first monitor’s DisplayPort input, then connect the first monitor’s DisplayPort output to the next monitor’s input. This requires a compatible source and monitors that support MST; the first monitor also needs a downstream DisplayPort output. Follow the monitor maker’s instructions to enable DisplayPort 1.2 or MST if required. Microsoft describes this arrangement as the first display passing the signal to the second in its Surface external-display troubleshooting guidance.
#1 Best Overall
DisplayPort Splitter 1 in 2 Out, Display Port Splitter for Dual Monitors 4K@60Hz, Extended Display MST Hub for HDMI and DisplayPort Monitors, DP to DP/HDMI Adapter for Desktop/NVIDIA/AMD Graphics Card
- 【DP to HDMI & DisplayPort Adapter with 4K@60Hz Support】This versatile adapter converts one DisplayPort signal into two independent HDMI or DisplayPort outputs, allowing you to set up dual monitors for work or entertainment. It supports both Extended and Mirror modes for flexible screen arrangement. For optimal performance, we recommend connecting to a 5V/2A power adapter (sold separately).
- 【4K@60Hz Single Display & 4K@30Hz Dual Display】Enjoy vivid 4K visuals with support for 4K@60Hz on a single display, or 4K@30Hz across two displays simultaneously. Advanced image processing ensures rich colors, sharp contrast, and smooth motion, ideal for productivity, gaming, and multimedia consumption.
- 【Broad Compatibility with DisplayPort 】Featuring a high-performance chipset, this converter is compatible with most devices equipped with DisplayPort source ports, including desktops (HP, Dell, Lenovo) and graphics cards (AMD, NVIDIA). Ensure your GPU supports >18Gbps bandwidth for stable multi-monitor expansion. If no signal is detected, try updating your graphics driver to the latest version.
- 【Plug & Play Setup with Universal Power】No drivers or software required—simply connect your DP source to the adapter, power it via the included USB-C cable, and attach your HDMI or DisplayPort displays using standard cables. Designed for reliable standalone use; do not connect to KVMs, hubs, or docking stations to ensure compatibility and stable performance.
- 【Key Usage Guidelines for Seamless Operation】Confirm your source device has a DisplayPort output (not HDMI or USB); This is a one-way converter from DP source to HDMI/DisplayPort displays only; Always connect the USB-C power cable to ensure consistent operation. For any questions or assistance, please feel free to contact our support team.
Use a DisplayPort MST hub
Connect an MST hub to a compatible DisplayPort output, then connect each monitor to a separate hub output. This is often the practical choice when the monitors lack downstream DisplayPort outputs. Check that the computer can supply multiple independent streams and that the hub supports the output types and display modes you need.
Use a USB-C or Thunderbolt dock
A dock can carry DisplayPort video over a USB-C connection when the computer’s port supports video and the dock provides the needed display outputs. Some docks can also carry USB data and charging power. VESA explains the DisplayPort Alt Mode path in its DisplayPort FAQ. A USB-only hub is not a video dock, and a USB-C connector by itself does not confirm video support. Check the computer and dock specifications before connecting displays.
Rank #2
DGYBDFC Displayport Splitter 3 Monitors Dual DP with HDMI Adapter 4K60Hz Extended Display 1 in 3 Out Displayport MST Hub for Multiple Monitors Compatible for PC, Graphics Card, Lenovo, HP and More
- Multi-Screen Display Adapter: Display port Splitter 3 Monitors allows the DP signal to be mirrored (SST) or expanded (MST) from one source to 2 DP monitors and 1 HDMI monitor, displaying a clear 4K UHD picture while transmitting high quality audio and video. Note: Be sure to connect the Micro USB cable for optimal display. Do not use with any docking station/hub/KVM, only unidirectional 1 in 3 out transfer. This product does not support laptops as a signal source.
- Important Note! ! !: 1. The splitter requires that your computer must support DP1.2 version of the graphics card or above; 2. Please use DP1.4 or above the standard DP cable, and the length of the DP cable does not exceed 1.8M; 3. MacOS system does not support MST, that is, it does not support the expansion of two different displays. 4. Does not support the use of HDMI to DP docking station or adapter cable to connect the computer to the product's DP input port; 5. DP cable is not included in the package. 6. Please consult customer service before placing an order to ensure compatibility between your computer and the product
- 4K Ultra High Definition Resolution: Displayport MST Hub 3 Monitors supports DP1.4 inputs for simultaneous output of 4K60Hz resolution when 3 monitors are connected at the same time, and dual 4K120Hz when 2 DP outputs are connected individually. HDMI output ports support up to 4K60Hz only. It is backward-compatible with 2K120Hz/60Hz and 1080P120hz/60Hz. Vivid images give you more stunning on-screen color and contrast. The final resolution depends on your computer and cables
- Extended/Mirror Display Plug and Play: DisplayPort to Dual DP with HDMI Adapter is plug and play, no driver installation required. Instantly and losslessly mirror/extend the DP signal from the source device to two DP monitors and one HDMI port monitor. All three monitors display the same content in mirroring mode, and all three monitors display different content in extended mode. Mac OS systems only support mirroring mode display due to the system display
- Optional Connection Length: The Displayport Monirtor Splitter input can be connected to DP cables of different lengths to meet your needs for different connection distances. It is recommended that the length of the input cable does not exceed 1.8 meters and the length of the output cable does not exceed 2 meters to ensure the stability of the video transmission. DP cable is not included in the package, please prepare your own video cable for connection
Check compatibility before you buy or connect
- Computer and graphics limits: Confirm that the specific output and graphics hardware support MST or the relevant multi-display path, and check the computer’s maximum supported display count. A hub or chain does not raise that overall limit. Microsoft notes that the display adapter may limit the number of screens; Apple says the supported total depends on Mac model and display modes. Consult Microsoft’s guidance or Apple’s guide to connecting displays to a Mac for the relevant device.
- Monitor ports and MST support: For a chain, verify that the first monitor has a DisplayPort output and supports MST, and confirm the downstream behavior in the exact monitor documentation.
- Display modes and bandwidth: Look up the intended resolution and refresh rate for every screen across the computer, hub or dock, and monitors. Resolution, refresh rate, color depth, chroma format, and compression all affect how much of the shared link capacity is used.
- Separate desktops rather than duplication: Make sure the device is an MST hub, not a simple splitter that duplicates one input. Microsoft specifically distinguishes splitters that show the same signal from MST arrangements that can pass a signal between displays in its external-display troubleshooting guidance.
Set up the monitors
- Choose the route: Use a daisy chain if the source and monitors support MST and the first monitor has a downstream DisplayPort output. Otherwise, consider an MST hub. Use a USB-C or Thunderbolt dock only if the computer supports video through that port and the dock supports the required screens.
- Connect the hardware: For a chain, connect the computer to the first monitor, then that monitor’s DisplayPort output to the next monitor. For a hub or dock, connect it to the computer and attach each monitor to a separate display output.
- Enable MST if needed: Check the monitor’s on-screen menu and manufacturer instructions for DisplayPort 1.2 or MST settings. The exact menu names vary by monitor.
- Configure the operating system: Open the display settings for your operating system and choose an extended desktop if you want separate workspaces rather than mirrored screens. Available display modes remain subject to the computer’s graphics and link limits.
- Validate each screen’s mode: Set the desired resolution and refresh rate for each display, then verify that the full combination works. If a mode is unavailable or a screen is unstable, lower the resolution or refresh rate and recheck the specifications of each part of the chain.
What determines the maximum number of displays?
There is no universal monitor count or resolution-and-refresh-rate maximum for “one DisplayPort cable.” The answer depends on the source’s display support, the DisplayPort link and its available bandwidth, the hub or monitor chain, operating-system limits, and the modes requested for all screens. For Macs in particular, Apple’s model-specific guidance is important: a hub or chain can connect multiple screens through one Thunderbolt port, but it does not increase the Mac’s overall supported display limit. See Apple’s Mac display connection guide.
The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Quick Recap
Best Value
Display Port Splitter for Dual Monitors, 4K@120Hz DisplayPort to Dual DisplayPort Adapter, Displayport MST Hub, Monitor Splitter, Dual Monitor Adapter for Laptop, Desktop, Graphics Card and More
- 【Display Port Splitter 1 In 2 Out】The DisplayPort splitter is designed to mirror or extend video signals from a single DisplayPort source to two DisplayPort monitors. It’s perfect for multitasking, presentations, and immersive viewing. To ensure optimal functionality, please confirm that your device has DisplayPort interfaces before purchasing. This dual monitor splitter is not compatible with docking station, USB hubs or KVM switch, and only supports signal DisplayPort source output to dual DisplayPort displays.
- 【Up to 4K@120Hz Resolution】This DisplayPort splitter for dual monitors supports resolutions up to 4K at 120Hz, delivering ultra-smooth visuals with stunning clarity. It is also backward compatible with lower resolutions such as 4K@60Hz and 1080p@60Hz, making it versatile for various setups. Note: To achieve dual 4K@120Hz output, please make sure your source device supports DisplayPort 1.4 and DSC (Display Stream Compression). Additionally, use a high-quality DisplayPort 1.4 cable no longer than 6 feet (1.8 meters) to ensure stable signal transmission.
- 【Multiple Display Modes】The DisplayPort splitter for dual monitors supports both SST (AAA/ABB) and MST (ABC) modes. Please ensure that the DP port on your host device is from a dedicated graphics card rather than an integrated graphics card. Due to hardware limitations, integrated graphics may not support display output or may only support mirror mode. If you cannot get the extended display, please update your graphics card driver to the latest version. Before use, connect the USB-C power cable to a USB port on the DisplayPort MST hub. This will supply power to the built-in chipset of the DisplayPort hub. Please use a 5V 2A power adapter (not included in the package).
- 【Wide Compatibility】This Displayport MST hub is compatible with Windows, Vista, XP, Linux, and Unix operating systems. It supports input from various DisplayPort-enabled devices such as PCs and laptops, making it ideal for multimedia teaching, conference rooms, office use, and gaming setups. No drivers are required—plug and play for effortless setup. The compact and lightweight design makes it easy to carry and good for on-the-go use.
- 【Anti-Interference Design】This DisplayPort adapter is equipped with a built-in smart chip for enhanced performance and reliability. The non-locking connector design helps prevent damage to your graphics card when unplugging. In addition, All ports on the DisplayPort splitter support DisplayPort 1.4 and feature multi-layer shielding to ensure durable construction and stable signal transmission. What you get: 1* DisplayPort Splitter, 1* USB Power Cable, 1* User Manual.
Rank #4
DisplayPort to Dual DisplayPort Splitter 4K@120Hz, USB-C Powered, Display Port 1.4 MST Hub for Dual Monitors Extended/Clone Mode for Desktop PC Graphics Card Home Office Gaming Stock Screen
- 【DisplayPort 1 Input to 2 DisplayPort Outputs】This DisplayPort splitter allows you to connect two DP monitors simultaneously from a single DisplayPort on your desktop PC or graphics card. Perfect for expanding your workspace or setting up a dual monitor display. No driver installation required – plug and play. Note: USB-C power (5V/2A) is required for operation as DisplayPort does not provide power.
- 【Supports 4K@120Hz High Resolution & High Refresh Rate】This DP MST hub supports up to 4K (3840×2160) at 120Hz for single monitor output, delivering smooth, clear, and lag-free visuals. Ideal for gaming, video editing, and fast-paced content. Both monitors can run at 4K@60Hz simultaneously when using DP 1.4 with DSC. Note: 4K/120Hz requires source, cable, and monitor all supporting 4K/120Hz.
- 【Extended Mode (MST) & Clone Mode Supported】Switch between extended desktop mode to expand your workspace across two monitors for increased productivity in stock trading, programming, or video editing, or clone mode to display the same image on both monitors for presentations, meetings, or classroom settings. Works perfectly with Windows 11/10.
- 【Designed for Desktop PC & Graphics Card Users】This DisplayPort splitter is compatible with desktop PCs and graphics cards (AMD, NVIDIA, Intel) that have a DisplayPort 1.2 or higher port with MST support. Works with HP, Dell, Lenovo, and mini PCs like Mini-ITX or Small Form Factor. Note: Independent graphics card recommended. Integrated graphics may have limited functionality. macOS only supports clone mode, not extended MST mode.
- 【USB Powered + Compact Design】DisplayPort carries video signal only, not power. This DP splitter requires USB-C power (5V/2A) to run the internal MST chip – simply connect to a USB-A port on your PC or a phone charger (adapter not included). Compact palm-sized design with a 28cm integrated cable reduces port strain and keeps your setup tidy. Package includes: DP splitter ×1, USB-A to USB-C power cable ×1, user manual ×1.
Rank #3
Displayport MST Hub, 4K@120Hz Display Port Splitter for Dual Monitors, DP to Dual DP Adapter 1 in 2 Out, DisplayPort Splitter Extended Display, Monitor Splitter for Laptop, Desktop, Graphics Card
- 【Display Port Splitter 1 In 2 Out】The DisplayPort splitter is designed to mirror or extend video signals from a single DisplayPort source to two DisplayPort monitors. It’s perfect for multitasking, presentations, and immersive viewing. To ensure optimal functionality, please confirm that your device has DisplayPort interfaces before purchasing. This dual monitor splitter is not compatible with docking station, USB hubs or KVM switch, and only supports signal DisplayPort source output to dual DisplayPort displays.
- 【Up to 4K@120Hz Resolution】This DisplayPort splitter for dual monitors supports resolutions up to 4K at 120Hz, delivering ultra-smooth visuals with stunning clarity. It is also backward compatible with lower resolutions such as 4K@60Hz and 1080p@60Hz, making it versatile for various setups. Note: To achieve dual 4K@120Hz output, please make sure your source device supports DisplayPort 1.4 and DSC (Display Stream Compression). Additionally, use a high-quality DisplayPort 1.4 cable no longer than 6.5feet (2 meters) to ensure stable signal transmission.
- 【Multiple Display Modes】The DisplayPort splitter for dual monitors supports both SST (AAA/ABB) and MST (ABC) modes. Please ensure that the DP port on your host device is from a dedicated graphics card rather than an integrated graphics card. Due to hardware limitations, integrated graphics may not support display output or may only support mirror mode. If you cannot get the extended display, please update your graphics card driver to the latest version. Before use, connect the USB-C power cable to a USB port on the DisplayPort MST hub. This will supply power to the built-in chipset of the DisplayPort hub. Please use a 5V 2A power adapter (not included in the package).
- 【Wide Compatibility】This Displayport MST hub is compatible with Windows, Vista, XP, Linux, and Unix operating systems. It supports input from various DisplayPort-enabled devices such as PCs and laptops, making it ideal for multimedia teaching, conference rooms, office use, and gaming setups. No drivers are required—plug and play for effortless setup. The compact and lightweight design makes it easy to carry and good for on-the-go use.
- 【Anti-Interference Design】This DisplayPort adapter is equipped with a built-in smart chip for enhanced performance and reliability. The non-locking connector design helps prevent damage to your graphics card when unplugging. In addition, All ports on the DisplayPort splitter support DisplayPort 1.4 and feature multi-layer shielding to ensure durable construction and stable signal transmission. What you get: 1* DisplayPort Splitter, 1* USB Power Cable, 1* User Manual.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
