iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
The POCA Audio PINE Beat is officially documented as a portable Bluetooth speaker, not a pair of earbuds. To pair it for the first time, turn the speaker on, open your phone’s Bluetooth settings, select PINE Beat, and wait for the “Glacial Ice” confirmation chime. The speaker should reconnect automatically to that device later.
If you expected a charging case, left and right earbuds, or touch controls, check the model printed on your hardware. Those features are not described for PINE Beat. The steps below cover the documented speaker, including first pairing, switching to another device, two-speaker TWS stereo, charging, controls, battery care, and troubleshooting.
First, identify the product correctly
POCA Audio’s user guide and product page describe PINE Beat as a portable Bluetooth speaker. The published instructions do not describe left and right earbuds, a charging case, earbud touch controls, or removing earbuds from a case. Do not apply generic earbud instructions to this model.
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minutePC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11This guide covers the verified PINE Beat speaker setup: first-time Bluetooth pairing, connecting another phone, stereo pairing of two PINE Beat speakers, charging, controls, battery care, and practical troubleshooting.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
The correction matters because the controls and pairing sequence are different. There is one speaker Power button and one Play button, rather than two independent earbuds. The documented action for making the speaker discoverable to a new device is a two-second hold of Play; it is not an earbud reset gesture.
Quick answer: the shortest correct pairing path
- Hold Power for two seconds to switch on PINE Beat.
- Open Bluetooth settings on the phone, tablet, or computer.
- Choose PINE Beat from the available devices.
- Wait for the “Glacial Ice” chime. That is the guide’s confirmation that pairing succeeded.
After the first successful connection, the POCA Audio guide says, “From now on, it’ll reconnect automatically.” If you are connecting a different device, hold Play for two seconds first, then select PINE Beat on that device.
What you need before pairing
- The PINE Beat speaker with sufficient charge.
- A phone, tablet, or computer with Bluetooth enabled.
- The speaker powered on and within normal Bluetooth range of the device.
- A quiet enough environment to hear the startup and pairing chimes.
For a first connection, no separate pairing command is required: the guide says the speaker automatically enters pairing mode when it is switched on. Keep the phone near the speaker while its Bluetooth list refreshes. If PINE Beat was already connected to another device, use the manual new-device procedure rather than waiting for automatic discovery.
How to pair PINE Beat with a phone for the first time
- Power on the speaker. Hold the Power button for two seconds. The guide describes a startup chime and a flashing white LED.
- Open Bluetooth settings on your phone. On most phones this is Settings > Bluetooth; the exact menu name can vary by operating-system version.
- Enable Bluetooth if it is off, then wait for nearby devices to appear.
- Select “PINE Beat.” Tap the device name when it appears in the available-device list. Select the entry that matches that spelling rather than an unrelated speaker or previously saved device.
- Confirm the connection. The POCA Audio guide says, “You’ll hear a Glacial Ice chime when successfully paired.”
Once paired, start audio from the phone and adjust volume either from the phone or with the speaker’s volume controls. If the phone reports that it is connected but you hear no chime, wait a moment and verify the Bluetooth status before assuming setup is complete.
The first pairing creates the relationship used for later reconnection. The guide’s wording is explicit that PINE Beat will reconnect automatically in the future. Automatic reconnection still depends on Bluetooth being enabled and the previously paired device being available; if you are deliberately using a different device, enter pairing mode manually.
How to pair a new device
If PINE Beat is already paired with one device and you want to connect a different phone, tablet, or computer, place the speaker into pairing mode manually:
- Turn the speaker on.
- Hold the Play button for two seconds. This is the documented command for entering pairing mode for a new device.
- On the new device, open Settings > Bluetooth.
- Select PINE Beat from the device list.
- Wait for the “Glacial Ice” chime before playing audio.
Pairing a new device is not the same as pairing two speakers together. The two-second Play hold makes the speaker available in the Bluetooth list; it does not create a stereo link. For TWS, use the separate two-speaker sequence below.
Free tools Windows power users keep installed
One-click scans. No signup required.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
If the old phone is nearby and actively connected, temporarily disconnect it or turn off its Bluetooth while you pair the new device. The TWS instructions specifically require that only one phone be connected during stereo setup, and the same precaution avoids a competing connection when changing phones.
First pairing, new-device pairing, and TWS: which path applies?
| Goal | What you need | Button sequence | Phone connection |
|---|---|---|---|
| First connection | One PINE Beat and one source device | Power on; the speaker enters pairing mode automatically | Select PINE Beat in Bluetooth settings |
| Connect another device | One PINE Beat and a new source device | Hold Play for two seconds | Select PINE Beat after it becomes discoverable |
| TWS stereo | Two PINE Beat speakers and one source device | Double-press Play on each speaker | Connect the phone to one speaker; only one phone should be connected |
This is the useful comparison for PINE Beat. The product documentation does not establish separate earbuds, earbud modes, or an earbud-versus-speaker feature set.
Pair two PINE Beat speakers in TWS stereo mode
The PINE Beat guide calls its two-speaker stereo feature TWS. You need two PINE Beat speakers and one phone or other source device. TWS is a speaker-to-speaker link, so do not try to pair both speakers independently to the same phone before starting.
- Power on both PINE Beat speakers.
- Connect your phone to one of the speakers using the normal Bluetooth procedure.
- Make sure only one phone or source device is connected during setup.
- Double-press the Play button on the first speaker.
- Double-press the Play button on the second speaker.
- Wait for the pairing sound indicating that the two speakers have linked.
After the TWS link is established, play audio from the phone connected to the system. If the speakers do not link, check that both are powered on, that the Play button was double-pressed on each one, and that no second phone is connected. A single tap or a two-second hold is not the documented TWS command.
When you want to return to one-speaker use, stop using the second speaker and connect the phone to the speaker you intend to use. The guide does not provide an earbud-style left/right reset procedure, so avoid searching for one.
Power, playback, volume, and EQ controls
| Action | Documented control | Result |
|---|---|---|
| Power on or off | Hold Power for two seconds | Power-on chime and flashing white LED; the LED turns off when powered down |
| Play or pause | Tap Play once | Toggles playback |
| Change track | Tap the volume/track button | Moves through tracks according to the button used |
| Adjust volume | Hold the volume/track button | Raises or lowers volume according to the button used |
| Change equalizer mode | Tap EQ | Cycles Outdoor, Extra Bass, Audiobook, and Indoor modes |
| Enter Bluetooth pairing mode for another device | Hold Play for two seconds | Makes PINE Beat available for selection in Bluetooth settings |
The exact direction of track and volume changes depends on which of the two volume/track buttons you press. The guide documents tap for navigation and hold for volume adjustment; it does not describe earbud-style touch gestures.
The EQ button cycles four named modes: Outdoor, Extra Bass, Audiobook, and Indoor. These are selectable listening profiles, not separate Bluetooth connections. If playback appears unchanged, press EQ again to move through the cycle and listen for the mode change.
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Charge the PINE Beat safely
- Find the silicone cover at the rear of the speaker.
- Open the cover and connect the included USB-C cable.
- Use a 5 V, 2.4 A supply as specified in the POCA Audio guide.
- Keep the cable and charging connection dry while charging.
- Close the silicone tab after disconnecting the cable.
The guide says a full charge takes approximately 2.5 hours when charging at 2.4 A. It also says a USB-C wall plug rated above 30 W can charge faster. That statement is a manufacturer instruction, not an independently measured charging test; actual time can vary with the charger, cable, battery condition, and temperature.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
PINE Beat has four battery LEDs. Each LED represents 25 percent of the battery indication, so the four-light display is a quarter-step gauge rather than a precise percentage meter. A partially lit display should therefore be read as an approximate range, not an exact remaining-time calculation.
Do not force the silicone cover closed around a wet connector. Wipe and dry the cable and port first, then close the tab after charging. The charging guidance specifies the included USB-C cable; the product page also identifies USB-C phone-charging support as a feature, but it does not provide a separate phone-charging procedure or performance figure.
Battery replacement and water protection
The manufacturer describes the battery as user-replaceable. Before opening the battery compartment, turn the speaker upside down and then open the battery lid as directed in the guide. Keep the battery itself dry and free of dirt. Do not open the compartment with moisture or debris around the seal.
Before cleaning the speaker, close both the charging-port tab and the battery lid. The product page lists an IP67 rating, but the seals only protect the speaker when those covers are properly closed. Avoid charging while the connector or port is wet.
Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Repair Windows errors before they cause bigger problems3Fix the driver behind crashes, sound loss and screen glitchesA user-swappable battery is different from an earbud charging case: the documented replacement access is on the speaker, and the guide’s orientation instruction is to turn the speaker upside down before opening the battery lid. Do not substitute a random battery pack. The official materials identify a PINE Beat battery pack as an accessory context, but they do not establish compatibility for unverified third-party parts.
Manufacturer-listed PINE Beat specifications
| Feature | Published information | Qualification |
|---|---|---|
| Product type | Portable Bluetooth speaker | From POCA Audio’s official guide and product page |
| Bluetooth | Bluetooth 5.3 | Manufacturer-listed specification, not an independent test result |
| Water and dust resistance | IP67 | Manufacturer-listed rating; covers must be closed correctly |
| Charging connector | USB-C | Use the included cable and keep it dry |
| Charging input in the guide | 5 V at 2.4 A | Manufacturer charging instruction |
| Approximate full-charge time | About 2.5 hours at 2.4 A | Guide figure; not an independent measurement |
| Playback time | Up to 30 hours | Product-page claim that depends on volume, settings, and audio type |
| Other features | Auxiliary input, TWS, phone charging through USB-C, user-swappable battery | Manufacturer-listed features |
| Warranty | 30 months | Product-page statement; regional terms may apply |
The “up to 30 hours” figure is a product-page claim and varies with volume, settings, and audio type. It should not be read as a guaranteed runtime for every listening session. Likewise, Bluetooth 5.3 and IP67 are listed specifications, not independent laboratory findings.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Troubleshoot pairing problems
“PINE Beat” does not appear in Bluetooth settings
- Confirm that the speaker is on by holding Power for two seconds and checking for the startup indication.
- If it was previously connected to another device, hold Play for two seconds to re-enter pairing mode.
- Keep the phone close to the speaker while the device list refreshes.
- Turn Bluetooth off and on again on the phone, then search again.
- Check that you are looking under available or discoverable devices, not only saved connections.
The phone shows PINE Beat, but connection fails
- Select the listed PINE Beat entry again after manually entering pairing mode with the two-second Play hold.
- Check that another phone is not currently controlling the speaker, especially when preparing TWS mode.
- Power the speaker off by holding Power for two seconds, power it on again, and repeat the documented pairing steps.
- Keep only the intended source device active while testing, so automatic reconnection does not redirect audio to an older device.
There is no confirmation chime
The guide identifies the “Glacial Ice” chime as the successful-pairing confirmation. If you do not hear it, treat the connection as incomplete: check the phone’s Bluetooth status, select PINE Beat again, and wait for the chime before testing playback. A phone listing alone is not the same as the documented audible confirmation.
TWS speakers will not link
- Power on both speakers.
- Connect only one phone to one speaker.
- Double-press Play on both speakers, not just one.
- Wait for the pairing sound before starting audio.
- If either speaker is connected to another phone, disconnect that phone and repeat the sequence.
The speaker will not charge
- Check that the USB-C plug is fully inserted and that the rear silicone tab is open while connecting.
- Use the specified 5 V, 2.4 A charging setup where possible.
- Keep the cable and port dry. Close the tab after charging.
- If the battery compartment has recently been opened, ensure the battery lid is correctly closed before using or cleaning the speaker.
- Allow the connector to dry completely before trying again; do not charge through a wet port.
Battery indication seems imprecise
The four LEDs represent 25-percent steps. The display is therefore an approximate quarter-step indication, not a continuously updated percentage readout. A change of one light does not identify an exact remaining runtime.
Recommended Free Tools
What not to do
- Do not look for a charging case; the documented PINE Beat product is a speaker.
- Do not remove imaginary left and right earbuds or hold an earbud touch surface; those actions are not in the POCA Audio guide.
- Do not invent an earbud reset sequence. The documented new-device action is holding Play for two seconds to enter Bluetooth pairing mode.
- Do not charge through a wet USB-C connection or clean the speaker with the charging-port tab or battery lid open.
- Do not open the battery lid with dirt or moisture around the seal.
- Do not assume the advertised IP67 rating applies when the silicone covers are open.
- Do not treat the 30-hour playback claim, 2.5-hour charge estimate, or Bluetooth 5.3 listing as independent test results.
If you meant a different POCA Audio earbuds model
The available official PINE Beat materials identify a speaker and do not establish an earbuds model with that name. If your hardware is genuinely a pair of earbuds, check the model printed on the case, packaging, or underside of the device and use that model’s manual. Earbud-specific pairing, charging-case, reset, and touch-control instructions cannot be supplied accurately from the PINE Beat documentation.
Look for a model name or number rather than relying on a retailer category or a shortened product title. Once the exact earbuds model is identified, its own manual can establish whether it uses a case button, touch surface, separate left/right pairing, or a particular reset sequence. None of those details should be inferred from PINE Beat.
Frequently Asked Questions
Is POCA Audio PINE Beat an earbud model?
No. POCA Audio’s official guide and product page identify PINE Beat as a portable Bluetooth speaker. They do not document earbuds or an earbud charging case.
How do I pair PINE Beat for the first time?
Hold Power for two seconds, open Bluetooth settings, select “PINE Beat,” and wait for the “Glacial Ice” chime.
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Clear out junk files and repair common Windows errorsFree Scan →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →How do I connect PINE Beat to a new phone?
Turn the speaker on, hold Play for two seconds to enter pairing mode, then select PINE Beat in the new phone’s Bluetooth settings.
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Will PINE Beat reconnect automatically?
The user guide says that after the first pairing, “From now on, it’ll reconnect automatically.” Bluetooth must still be enabled on the previously paired device.
How do I pair two PINE Beat speakers?
Power on both speakers, connect one phone to one speaker, ensure only one phone is connected, double-press Play on each speaker, and wait for the pairing sound.
What charger does PINE Beat use?
Use the included USB-C cable. The guide specifies 5 V at 2.4 A and says a full charge takes approximately 2.5 hours at 2.4 A. Keep the cable and port dry.
The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →What do the four battery LEDs mean?
Each LED represents 25 percent of the battery indication, so the display shows approximate quarter steps rather than an exact percentage.
Can I use generic earbud reset instructions for PINE Beat?
No. PINE Beat is documented as a speaker. The verified new-device action is holding Play for two seconds; no earbud reset sequence is provided.
The Bottom Line
POCA Audio PINE Beat is a portable Bluetooth speaker, not documented earbuds. For first pairing, hold Power for two seconds, select PINE Beat in Bluetooth settings, and listen for the “Glacial Ice” chime. To connect another device, hold Play for two seconds first. For TWS, connect one phone to one speaker and double-press Play on both speakers. Charge through the dry USB-C port at the guide’s specified 5 V, 2.4 A input, and keep the silicone covers closed for cleaning and water protection.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
