The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
The beyerdynamic DT 275 PRO does not have a documented built-in microphone or headset-mic monitoring control. It is a wired, closed, on-ear pair of monitoring headphones: it plays audio sent to it, but it does not capture your voice or create its own mic sidetone. To record speech and hear it in the headphones, connect a separate microphone and route its signal through a camera, recorder, audio interface, or mixer with headphone monitoring.
Does the DT 275 PRO have a microphone?
No built-in microphone is listed for the DT 275 PRO in beyerdynamic’s product specifications. The product is identified as wired, closed, on-ear monitoring headphones, and its specification says “Without Remote.” Its published feature list also does not identify a headset microphone input or a microphone-monitoring control. That makes it different from a headset designed to both play sound and capture speech. beyerdynamic’s DT 275 PRO product page and its headphones and headsets catalog are the relevant manufacturer references.
This describes what the manufacturer documents, not every accessory that a third party might devise. In practical terms, however, do not buy or configure the DT 275 PRO expecting it to record your voice by itself. Use a separate microphone connected to the device doing the recording or to an audio interface or mixer.
Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Clear out junk files and repair common Windows errors3Fix the driver behind crashes, sound loss and screen glitchesCan you use it for calls?
You can use it to listen to call audio if the computer, phone, or other device can send its output to the headphones through a compatible connection. But the DT 275 PRO alone cannot supply the microphone input a call needs. For two-way calls, select a separate microphone as the input device and the DT 275 PRO as the output device in the calling app or operating system. Whether that exact setup is possible depends on the ports, adapters, and audio routing available on your device.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
What “monitoring” means with these headphones
Here, monitoring means listening to an audio feed provided by connected equipment. The signal travels from a camera, recorder, interface, mixing console, DJ mixer, or other source through the headphone connection and into the DT 275 PRO. You hear what that equipment sends; the headphones themselves do not generate a microphone signal or decide what should be mixed into the feed.
For hearing your own voice while recording, the full path is microphone → camera, recorder, interface, or mixer → headphone output → DT 275 PRO. The external device must receive the mic signal and send it to its headphone output. If you also need to hear playback, that device must mix the mic and playback signals together. The exact routing controls vary by device, so check its instructions for headphone monitoring, input monitoring, or monitor mix.
Direct monitoring and software monitoring
Some recording devices can route an incoming microphone signal to the headphone output while recording; others let you hear it only after it has passed through recording or computer software. In either case, the monitoring function belongs to the device and its routing, not the DT 275 PRO. Software monitoring can add delay, depending on the computer, software, and audio settings. If your voice sounds late, look for a direct-monitoring option on the interface or recorder, or adjust the software’s monitoring and buffer settings. The DT 275 PRO specifications do not promise zero-latency monitoring.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
A mic sidetone is the sound of your own voice fed back to your headphones during a call or recording. The manufacturer’s published DT 275 PRO information does not describe built-in sidetone, a mic preamp, or a monitor-mix knob. If you need to hear your voice, confirm that the connected device can route the microphone to its headphone output before a session.
How to connect and monitor a microphone
The DT 275 PRO is the listening endpoint in this setup, not the recording device. Start by identifying which device will capture the microphone and whether it can also provide a headphone feed. The manufacturer describes workflows involving cameras, recorders, audio interfaces, mixing consoles, and DJ mixers, but the ports and monitoring controls differ across models. The product page lists the headphone connection formats and intended workflows.
- Connect the microphone to the recording device. Use the mic input appropriate for your microphone and device. Verify that the recording device recognizes an input signal; the headphones cannot correct a missing or improperly routed mic input.
- Connect the DT 275 PRO to the device’s headphone output. Its published connector is a 3.5 mm mini stereo jack plug, and the specifications list a 6.35 mm (1/4-inch) adapter. Match the plug to the output you are using. Do not assume that a headphone output and a microphone input are interchangeable.
- Enable monitoring or configure the monitor mix on the recording device. Send the microphone input to the headphone output. If you want to hear other sources as well, such as playback or a cue feed, adjust the device’s mix or routing as needed.
- Speak and check both the recording meter and headphone feed. A signal on the meter confirms that the recorder is receiving the mic; hearing the voice confirms that a monitor route is also active. Those are separate checks.
- Set a comfortable headphone level and make a short test recording. Confirm that the recording contains the intended voice and that the monitoring delay, if any, is acceptable for the task. Follow the recorder or interface instructions for input gain and output level.
If the voice is recorded but not audible
If the input meter moves and the recording captures speech, but the voice is absent from the headphones, the microphone path is working and the monitor path is the likely problem. Check that the recorder or interface sends that input to its headphone output, that the monitor mix includes it, and that headphone output level is turned up. If you are monitoring through computer software, check that the correct input and output devices are selected and that software monitoring is enabled.
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
If the voice is audible but not recorded
Hearing yourself does not by itself prove that the recording contains your voice. Some devices can provide a live input monitor even when the track or recording destination is not configured correctly. Check the recording input selection, track assignment, and meter while recording, then play back a test clip. Consult the connected device’s manual for its specific recording and monitoring controls.
If the connection does not fit
The DT 275 PRO uses a 3.5 mm mini stereo jack plug and is specified with a 6.35 mm adapter. Check the physical output and its purpose before connecting: a device may have separate headphone, line, and microphone sockets, and a plug adapter changes connector size rather than creating a microphone input or monitoring feature. The cable is detachable, locks into the headphones, and can connect to either earcup according to the manufacturer’s product information.
DT 275 PRO specifications that matter for setup
The following figures are manufacturer-published specifications for the headphone, not independent test results. In particular, impedance and sensitivity do not guarantee a particular listening volume from every camera, phone, recorder, or interface; the connected device’s headphone output matters too.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
| Specification | DT 275 PRO listing | What it tells you |
|---|---|---|
| Design | Wired, closed, on-ear | It is a headphone for listening to a wired feed, not a documented wireless or microphone-equipped headset. |
| Nominal impedance | 45 ohms | A published electrical specification; it is not a promise of a specific volume on every source. |
| Weight | 195 g without cable | The manufacturer’s listed headphone weight excludes the cable. |
| Frequency response | 5–24,000 Hz | The manufacturer’s stated headphone response range. |
| Nominal sound pressure level | 105 dB | The manufacturer’s stated nominal SPL figure; do not treat it as a device-specific output guarantee. |
| Plug and adapter | 3.5 mm mini stereo jack plug; 6.35 mm (1/4-inch) adapter | Check the output socket and use the appropriate listed connection format. |
| Cable | Detachable, locking; connectable to either earcup | The cable can be removed and attached on either side as described by the manufacturer. |
| Remote or microphone controls | “Without Remote”; no mic control documented | The listing does not describe an inline call remote or headset microphone function. |
These specifications and the manufacturer’s descriptions of passive isolation and balanced monitoring are on beyerdynamic’s North American DT 275 PRO listing. The isolation and tuning descriptions are product claims, not independent laboratory measurements.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Where the DT 275 PRO fits—and what it does not replace
beyerdynamic positions the DT 275 PRO as compact, high-isolation monitoring headphones for video shoots, front-of-house (FOH) and side-stage work, livestreaming, DJ cueing, and mobile audio. Closed construction and passive isolation are intended to help when ambient sound is a concern, while its on-ear form, swiveling earcups, and 195 g listed weight without cable suit portable use. The cable, ear pads, and headband padding are described as replaceable, which supports serviceability over time. These are the manufacturer’s stated use cases and product features, not independent performance findings.
The manufacturer describes two nearby models for different needs. This is useful context if your real requirement is a different fit or a more explicitly headset-oriented product, but it is not a substitute for checking whether a particular model includes the microphone and monitoring functions you need.
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
| Model | Manufacturer-described distinction | What to verify for your setup |
|---|---|---|
| DT 275 PRO | Closed, on-ear monitoring headphones positioned for loud or mobile audio work; no built-in mic is documented. | Use a separate microphone and a device that routes its signal to the headphone output if you need to hear your voice. |
| DT 270 PRO | Over-ear headphones associated by the manufacturer with practice, recording, podcasts, and indoor studio work. | The cited positioning does not establish microphone or sidetone features; check the model’s own specifications for those requirements. |
| DJ 300 PRO X | DJ-oriented model with interchangeable on-ear and over-ear pads and customization features. The manufacturer says its detachable cable is compatible with the DT 275 PRO. | Do not infer mic functionality from the cable compatibility or the DJ positioning; verify the exact feature list for the model. |
The distinctions above reflect the manufacturer’s product positioning, not a comparative listening test. If the microphone is the deciding feature, look specifically for an included microphone or a clearly documented mic input and sidetone/monitoring function rather than relying on the word “headset” in a general category.
What to check before choosing it for a recording or call
The right question is not simply whether the DT 275 PRO can be plugged into your device. Decide first whether you need playback only, speech capture, or both capture and live self-monitoring. The headphone handles the first role. The other roles depend on an external microphone and the connected equipment.
- For listening only: Check that your source has a compatible headphone output and that its output level is suitable. Use the listed plug or adapter format as appropriate.
- For recording speech: Add a separate microphone and confirm that the camera, recorder, interface, or mixer has a compatible mic input.
- For hearing yourself live: Confirm that the recording device can route its mic input to the headphone output, either directly or through software.
- For calls: Set the microphone and headphones as separate input and output devices if your computer or calling setup supports that arrangement.
- For a noisy or mobile setting: Consider the manufacturer’s stated closed design and passive isolation, then check whether an on-ear fit works for the duration and environment of your session.
- For long-term maintenance: Check current availability of replacement pads, headband padding, and cable in your region. Stock and spare-part availability can change.
Regional product details, availability, and package contents can change. Confirm the current listing for your country before buying, and check the manual for your actual recorder, camera, computer, interface, or mixer for its input and monitoring procedure.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
