iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
The Fanttik S1 Pro (also sold as the NEX S1 Pro) is a rechargeable cordless screwdriver kit whose historical deal price reached $29.99 and whose regular delivered price is typically higher. A roughly $35 offer is plausible, but the live price must be checked because deal inventory and retailer pricing change. The key distinction is torque: its highest normal electric setting is 4.2 N·m, while Fanttik’s separately stated 6 N·m figure is a maximum hard-torque ceiling and 8 N·m is manual torque.
What the Fanttik S1 Pro includes
This is a compact, general-purpose electric screwdriver rather than a specialist laptop-repair driver. Fanttik’s kit contains a 1/4-inch magnetic hex chuck, 16 S2 hardened-steel bits, three electric torque levels, a 2,000 mAh rechargeable battery, USB-C charging, an LED ring light and a magnetic aluminum-alloy storage case.
| Specification | Fanttik’s stated figure or feature |
|---|---|
| Normal electric torque levels | 1.5, 3 and 4.2 N·m |
| Maximum hard torque | 6 N·m |
| Manual torque | 8 N·m |
| Battery | 2,000 mAh rechargeable pack |
| Charging | USB-C |
| Bits | 16 S2 hardened-steel bits |
| Chuck | 1/4-inch magnetic hex |
| Lighting and storage | LED ring light and magnetic aluminum-alloy case |
What “up to 6 N·m” actually means
Marketing that says “up to 6 N·m” can make the tool sound as though 6 N·m is available in its regular powered mode. Fanttik’s specifications separate those numbers. The selectable electric gears top out at 4.2 N·m. The 6 N·m value describes maximum hard torque, while 8 N·m is the amount stated for manual operation. In practical use, choose among 1.5, 3 and 4.2 N·m for powered fastening and reserve the higher figures for situations where the tool’s mechanical transmission and your hand force are doing more of the work.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Is a $35 price a good deal?
It is potentially strong value if the listing is genuine, complete and includes shipping. Fanttik’s official product page was checked at $69.99 on sale against a $79.99 regular price. Separately, a Slickdeals listing dated August 14, 2026 recorded the 16-bit S1 Pro at $29.99 with free shipping. That history makes a $35 headline credible, but it does not establish that the same price is still available.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
- Confirm that the listing is for the S1 Pro/NEX S1 Pro, not a different Fanttik screwdriver.
- Check that all 16 bits, the case and the USB-C charging hardware are included.
- Review shipping, tax, seller identity, return terms and stock before paying.
- Compare the final delivered total rather than the large advertised discount.
How much work can it handle?
Furniture and household assembly
This is the most natural use case. The three powered settings, LED ring and organized bit case suit repeated fastening on flat-pack furniture, fixtures, socket boards, faucets and ordinary household projects. Start at 1.5 N·m, increase only when the fastener and material require it, and finish by hand when seating a screw into a soft material to avoid stripping or crushing it.
PC and gaming-computer work
The S1 Pro can be useful for PC cases, drives, fans and other larger computer fasteners where controlled low-to-medium torque is appropriate. Use the correct bit, keep the driver aligned with the screw head and stop as soon as the fastener seats. A powered setting that is safe for a case screw can still be excessive for a small board-mounted fastener.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Laptops and delicate electronics
Do not treat this as a universal precision screwdriver. Fanttik’s support guidance says tiny M2 and M2.5 laptop screws require substantially less torque than the S1 Pro’s lowest 1.5 N·m setting. For laptop teardown, delicate connectors and small electronics, use a dedicated lower-torque precision driver instead.
Battery and runtime expectations
Fanttik cites a manufacturer-certified figure of 340 screws per full charge, measured with 3.5 × 20 mm screws. That is a stated test condition, not an independent endurance test, so actual results will vary with screw size, material, torque setting, pauses and battery age. USB-C charging makes topping up convenient, but the supplied information does not establish a charging time or a removable-battery design.
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Trade-offs to consider before buying
| Priority | Where the S1 Pro fits | Important limitation |
|---|---|---|
| Fast household assembly | Strong fit; three electric levels and 16 bits | High torque can damage soft materials if used carelessly |
| PC building | Useful for case and other medium-duty screws | Use restraint on board-level or very small fasteners |
| Laptop repair | Generally unsuitable for tiny M2/M2.5 screws | Lowest setting is still above the torque those screws need |
| Organization and portability | Magnetic aluminum case and LED ring are practical | Kit value depends on receiving the complete bit assortment |
| Deal value | About $35 would undercut the checked official sale price | Prices and stock are temporary |
Bottom line for the $35 offer
Buy the Fanttik S1 Pro at about $35 if you want a compact powered driver for furniture, household projects or PC assembly and the live listing confirms the complete kit. Judge it by its 1.5–4.2 N·m electric range, not by reading the 6 N·m hard-torque ceiling as a normal operating gear. Choose a lower-torque precision screwdriver for laptops and other fragile electronics.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Frequently Asked Questions
Is the 6 N·m rating the setting I use most often?
No. The selectable powered levels are 1.5, 3 and 4.2 N·m; 6 N·m is Fanttik’s stated maximum hard torque.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Is the 340-screw battery claim independently tested?
No independent bench test is established here. Fanttik describes 340 screws as a certified manufacturer test using 3.5 × 20 mm screws.
Quick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
