Recommended Free Tools
iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
Banana Pi announced an Allwinner H618 version of its BPI-CM7 compute module on September 30, 2026. The manufacturer lists a quad-core Cortex-A53 processor, LPDDR4 memory, eMMC storage, Wi-Fi 5 and Bluetooth 5.0. However, the announcement does not establish that Armbian currently provides an image or official support for this exact module, and buyers should confirm carrier-board compatibility before ordering.
What Banana Pi announced
In its September 30, 2026 announcement, Banana Pi’s team describes the BPI-CM7 as a compute module built around the Allwinner H618. These are manufacturer-listed specifications, not independent measurements or test results.
- Processor: quad-core 64-bit Arm Cortex-A53, up to 1.5 GHz.
- Graphics: Arm Mali-G31 GPU.
- Memory and storage: LPDDR4 memory and onboard eMMC. The announcement title specifies 2 GB RAM and 32 GB eMMC.
- Wireless: K019 wireless module supporting Wi-Fi 5 and Bluetooth 5.0.
- Module connection: two 100-pin board-to-board connectors.
- Power: 5 V input.
The announcement does not include benchmark results, power measurements, thermal results or a tested software configuration, so the listed processor and GPU should not be taken as evidence of measured real-world performance.
Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Clear out junk files and repair common Windows errors3Scan for outdated or missing drivers - takes under a minuteWhich interfaces are listed?
Banana Pi lists HDMI, 10/100M Ethernet, one USB 2.0 OTG port and three USB 2.0 host ports. The module also lists microSD, GPIO, UART, TWI/I2C, SPI, PWM, I2S/PCM, DMIC, SPDIF and IR interfaces. The announcement does not detail how these signals are exposed on a carrier, so check the relevant carrier documentation for the connections you need.
#1 Best Overall
- [MediaTek MT7988A CPU] Banana Pi BPI-R4 Router Board with MediaTek MT7988A (Filogic 880) quad-core ARM Corex-A73 CPU design, 4GB DDR4 RAM 8GB eMMC and 128MB SPI-NAND flash onboard, works as 36Gbps Wi-Fi 7 access point/router/gateway. It is also a very high performance open source router development board.
- [High Performance Chips] The MediaTek MT7988A SoC is the world's leading network processing platform that delivers a high-performance and reliable network experience for wired and wireless applications. At the same time, the MT7988A is equipped with MediaTek's Tunnel Offload Processor System (TOPS), which easily handles a wide range of tunneling protocols.
- [Support 2x 10Gbe SFP/4x Gbe] Banana Pi BPI-R4 wireless dual-band wifi router board support 2x 10Gbe SFP and 4x Gbe ethernet with 4 Port 10/100/1000Mbps Gigabit Ethernet port, also with USB3.2 port and M.2 interface, support 4G/5G signal reception and NVME SSD.Providing the fastest and most reliable network connection.
- [Support WiFi7 iPA NIC Module] Banana Pi BPI-R4 wireless three-band router board onboard 2x miniPCIe slots with PCIe3.0 2lane interface for Wi-Fi 7 NIC (Network Interface Card). MediaTek MT7988A enables seamless Wi-Fi 7 tri-band, 2.4GHz, 5GHz and 6GHz connectivity, with its Wi-Fi 7 companion chip that features 320-MHz bandwidth, 4096-QAM, MLO, MRU and AFC.
- [Rich Peripheral interfaces] Banana Pi BPI-R4 wireless router board onboard 2x 10Gbe SFP Optical ports, 4x Gbe Gigabit LAN ports, 1x USB3.2 port, 3x Nano SIM Slot, 1x M.2 KEY-B connector for 5G, 1x M.2 KEY-M connector for 2280 NVME SSD, mPCle Slot for Wi-Fi NIC, 1x MicroSD Slot(TF), 1x Debug UART port, 1x 26 Pin GPIO, supports UART, I2C, SPI, PWM, I2S.
Is Armbian supported on the H618 BPI-CM7?
Current Armbian image availability or official board support for this exact H618 module is not established by the available documentation. Armbian’s general documentation explains its board-specific images and support information, but does not itself confirm support for this BPI-CM7. Check Armbian’s current board pages for the exact model before relying on it; a listing for a different BPI-CM7 variant would not confirm support for the H618 module.
What should you check before buying?
Confirm the exact module and carrier pairing
Banana Pi’s documentation index lists both the BPI-CM7 (Allwinner H618) and a BPI-CM7IO compute-module IO board. That listing does not confirm that the IO board is compatible with this H618 module. Ask the manufacturer or seller to confirm the exact model pairing and board revision, and verify that the carrier exposes the interfaces your project requires. Do not assume a carrier is included.
Rank #2
- [MediaTek MT7988A (Filogic 880) SoC] Banana Pi BPI-R4 Pro 8X/4E Wiifi 7 OpenWRT Router Board with MediaTek MT7988A (Filogic 880) SoC (Quad-core ARM Corex-A73 CPU design), onboard 4GB (4E)/8GB (8X) DDR4 RAM, 8GB eMMC and 128MB SPI-NAND flash, works as 36Gbps Wi-Fi 7 access point/router/smart gateway. It is also a very high performance open source router development boards. It is an upgraded version of the BPI-R4 router board.
- [Highly Efficient & Reliable Network] The MediaTek MT7988A SoC is the world's leading network processing platform that delivers a high-performance and reliable network experience for wired and wireless applications. At the same time, the MT7988A is equipped with MediaTek's Tunnel Offload Processor System (TOPS), which easily handles a wide range of tunneling protocols, delivering premium-level offloading capabilities.
- [2x 10Gbe SFP & RJ45/4x 2.5Gbe RJ45 LAN] Banana Pi BPI-R4 Pro wireless dual-band wifi router board support 1x 10G RJ45 WAN/LAN Port, 2x 10Gbe SFP and 4x 2.5Gbe ethernet with 4 Port 10/100/1000Mbps RJ45 LAN Gigabit Ethernet port, also with USB3.2 and M.2 interface, support 4G LTE/5G cellular network module and M.2 2280 NVME SSD. Providing the fastest and most reliable network connection.
- [Support WiFi 7 iPA BE14 NIC Module] Banana Pi BPI-R4 Pro 8X/4E wireless Tri-band router board onboard 2x miniPCIe slots with PCIe3.0 2lane interface for Wi-Fi 7 6E 6 NIC network card module. MediaTek MT7988A enables seamless Wi-Fi 7 tri-band, 2.4GHz (40MHz), 5GHz (160MHz) and 6GHz (320MHz) connectivity, with its Wi-Fi 7 companion chip that features 320-MHz bandwidth, 4096-QAM, MLO, MRU and AFC. PHY rate: up to 13700 Mbps/9500 Mbps. QoS: WFA WMM and WMM-PS.
- [Rich Peripheral interfaces] Banana Pi BPI-R4 wireless router board onboard 2x 10Gbe SFP Optical ports, 1x 10G RJ45 WAN, 1x 10G RJ45 LAN, 4x 2.5Gbe Gigabit LAN ports, 1x USB3.2 port, 3x Nano SIM Slots, 3x M.2 KEY-B connector for 5G/4G module, 2x M.2 KEY-M connector for M.2 2280 NVME SSD, 2x mini PCle slot for Wi-Fi NIC, 1x MicroSD Slot(TF), 1x Debug UART port, 1x 26 Pin GPIO header, supports UART, I2C, SPI, PWM, I2S.
Clarify storage and what ships
The module announcement lists onboard eMMC as well as a microSD interface. A microSD card is therefore a possible removable-storage accessory, not a stated requirement. The announcement does not specify supported card capacity or performance class, or whether a card is included; confirm these details if they matter to your setup.
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Repair Windows errors before they cause bigger problemsFix Now →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Verify the operating-system route
Before purchase, check for an Armbian entry and image that name the exact H618 BPI-CM7, or obtain written confirmation from the seller or manufacturer about a supported software image. Do not infer support from the general Armbian documentation or from a similarly named board.
Quick Recap
Best Value
- [MediaTek CPU Built in Filogic 830 chip ] Banana Pi BPI-R3 Router board with MediaTek MT7986(Filogic 830) quad core ARM A53 + MT7531A chip design.Filogic 830?s built-in hardware acceleration engine enables fast and reliable Wi-Fi offloading and wireless network connection,suitable for games, AR/VR and other low-latency applications
- [Strong Network Communication Capability] On-board 5x 1000Mbps RJ45 Ethernet, 2x SFP 2.5GbE port
- [Low-latency Wi-Fi 6 Connection] Wi-Fi 6 2.4G wifi use MT7975N and 5G wifi use MT7975P,which has many advantages over its predecessors, including lower latency, larger bandwidth capacity and faster transmission rates. it has enough bandwidth for 128 devices.
- [Massive Capacity Support] The on-board M.2 KEY-M PCIe inerface can be connected with SSD mass storage devices, which makes it a reality that the device can be easily expanded with TB storage capacity
- [Wide Application] It can be used for Internet service Router,Wireless Router,Wireless Repeater,Home security Gateyway,Home Automation,Nas device,Network and communication applications
Rank #4
- Banana Pi M2 Zero BPI-M2 Zero Quad Core Single-board Development Board Computer Alliwnner H2+ same as W
Rank #3
- [MediaTek MT7986A CPU] Banana Pi BPI-R3 Mini Router board with MediaTek MT7986A (Filogic 830) quad core ARM Cortex-A53 chip up to 2GHz with up to 18,000 DMIPs of processing power. Onboard 2GB DDR4 RAM and 8GB eMMC flash, 128MB SPI Nand Flash, with 2.5G PHY and MT7976C Chip. BPI-R3 mini router board can use Quectel RM500U-CN & RM520N-GL 5G modules.
- [Support Dual-band Wi-Fi 6/2x 2.5GbE] Banana Pi BPI-R3 mini open source computer wifi router board support Dual-band Wi-Fi 6 2.4G/5G with MT7976C wifi chip and support 2x 2.5GbE ethernet port at the same time. Which has many advantages over its predecessors, lower latency, larger bandwidth capacity and faster transmission rates. Enterprises and individuals can enjoy highly flexible network configurations.
- [Built-in Filogic 830 Chip] BPI-R3 Mini wireless router board built-in Filogic 830 Chip with “Mediatek FastPath” technology which Hardware Acceleration Engine for Fast and Reliable Wi-Fi Offloading, Multigigabit Transmission and Wireless Network Connectivity which suitable for streaming media, games, AR/VR and other low-latency applications.
- [Rich Peripheral interfaces] Banana Pi BPI-R3 mini router open source development board with M.2 PCIe socket that can be used with an M.2 2230 NVMe SSD, 4G LTE or a 5G module. Also onboard M.2 Key B interface, USB 2.0 port, 2x 2.5GbE Gigabit Ethernet port, serial peripheral interfaces (SPI), NANO SIM, 3-pin Debug UART and U.FL antenna connectors.
- [Wide Application Scene] The BPI-R3 Mini wifi 6 dual-band wifi router board is based on many of the same chips as found on the Banana Pi BPI-R3 router board, but with a much more compact design that makes it suitable as a 2.5GbE firewall, wireless router or wireless repeater, home security gateway, home automation gateway, NAS device, wireless internet service device, soft router and more.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.
