iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
Samsung’s HDMI-CEC feature is called Anynet+. To enable it, open the TV’s settings, find Anynet+ (HDMI-CEC) under External Device Manager, and switch it on. The menu route varies by TV year, and the connected device must also support HDMI-CEC.
Turn on Anynet+ on your Samsung TV
Use the path for your TV’s model year below. On many newer models, press Home on the remote, then go to Settings > All Settings > Connection > External Device Manager > Anynet+ (HDMI-CEC) and turn Anynet+ on. Samsung’s published paths are general guidance; regional interfaces and firmware can use different labels. [Samsung’s Anynet+ guide] [Samsung’s eARC guide]
| TV model year | Samsung-published menu path |
|---|---|
| 2025–2026 | Settings > All Settings > General & Privacy > External Device Manager > Anynet+ (HDMI-CEC) |
| 2023–2024 | Settings > All Settings > Connection > External Device Manager > Anynet+ (HDMI-CEC) |
| 2022 | Settings > General & Privacy > External Device Manager > Anynet+ (HDMI-CEC) |
| 2017–2021 | Settings > General > External Device Manager > Anynet+ |
| 2016 | Settings > System > Expert Settings > Anynet+ |
| 2014–2015 | Menu > System > Anynet+ |
These routes come from Samsung’s support instructions; if the labels do not match your screen, look in Settings for External Device Manager or consult the manual for your TV’s exact model code.
What Anynet+ does—and what you need
HDMI-CEC allows compatible devices to send control commands over HDMI. With Anynet+ enabled, your Samsung remote may control supported functions on a connected device, such as power or standby and some volume or audio controls. Starting playback on a device may also turn on the TV or switch it to that device’s input. [Samsung]
#1 Best Overall
- 【Wide Compatibility】 This premium voice remote is designed for All 2019–2026 Samsung TVs that support voice control. It is a perfect replacement for All 2019–2026 Samsung voice remotes. If your Samsung TV does not support voice control, that feature on this remote may not work.
- 【Intelligent Voice Control】Simply pair the remote with your TV to activate seamless Bluetooth voice control. The advanced chip ensures fast, accurate voice recognition from up to 40 feet away, allowing you to search, launch apps, and control playback with ease from almost any angle.
- 【Perfect Replacement Remote】It is a perfect replacement for all 2019–2026 Samsung voice remotes, including but not limited to BN59-01385A/B, BN59-01432A/B, BN59-01455A/B/E, BN59-01357A/F, BN59-01388A/B/H, BN59-01480A/B, BN59-01456A, BN59-01391A, BN59-01363A, BN59-01346A, BN59-01330A/B, BN59-01329A, BN59-01312A/G, BN59-01311B, TM2560E, TM2361E, TM2360E, TM2240A, TM2280E, TM2281E, TM2180E, TM2095A, TM1950, TM2050, One Remote, and many others.
- 【2-Year Full Warranty】All purchases are covered by a two-year warranty. With over 30 years of experience, we are committed to providing high-quality, affordable remote controls to millions of American households. If you need any product support, Go to your order > Get product support > Message Now > Product Question > Select the relevant product > Product Details.
- 【Durable & Reliable】This remote is crafted from sustainable ABS materials, making it safe and easy to use for all age groups. Each button is tested to withstand over 100,000 clicks or approximately 9 years of normal use.
- The connected device needs to support HDMI-CEC.
- Use an HDMI cable that supports the connection; Samsung notes that some HDMI cables may not support Anynet+.
- Samsung describes Anynet+ availability on most of its Smart TVs manufactured after 2008, but check the manual for your particular TV.
Samsung’s 2023 guidance states that Anynet+ can control up to 12 connected devices, with no more than three of the same type and one home theater system at a time. These are Samsung’s stated limits for its implementation, not a universal HDMI-CEC limit. [Samsung]
Fix a remote, input, or power problem
If a device does not respond to the TV remote, the TV switches inputs unexpectedly, or devices power on or off without the behavior you want, work through these checks in order. Samsung does not guarantee that any one step will resolve every compatibility issue. [Samsung troubleshooting guidance]
Rank #2
- 【Universal Remote for Samsung TVs】Compatible with Samsung Crystal UHD, Neo QLED, QLED, OLED, Curved, Frame Smart TV Models — A replacement remote for all original Samsung TV remotes (Note: The Disney+ button on this remote may not function with TV models manufactured before 2022.)
- 【Specific compatible TV models - including but not limited to】UHD & Crystal UHD: CU7000, DU7200, AU8000, HU/JU/JS Series (2015), KU/KS Series (2016), MU Series (2017), NU Series (2018), RU Series (2019), TU Series (2020), AU Series (2021), BU Series (2022), CU Series (2023), DU Series (2024), U7900/U8000 Series (2025)—— QLED: Q60, Q70, Q80, Q90 Series —— Neo QLED: QN70, QN800, QN85, QN90, QN900, QN950 Series —— OLED: S85F, S90C, S90D, S90F, S95B, S95C, S95D, S95F —— The Frame: LS03NAK(2018), LS03RA(2019), LS03TA(2020), LS03A (2021), LS03B (2022), LS03C (2023), LS03D (2024), LS03F (2025) etc.
- 【Replacement for Samsung TV remote】for Samsung TV Remotes BN59-01388A / BN59-01388H / TM2240A / BN59-01457A / BN59-01312A / BN59-01312F / BN59-01312D / BN59-01312E / BN59-01312F / BN59-01312G / BN59-01312K / BN59-01312L / BN59-01312M / BN59-01312X / BN59-01312U / BN59-01312T / BN59-01329A / BN59-01329C / BN59-01329F / BN59-01330A / BN59-01330C / BN59-01330H / BN59-01330N / BN59-01330Q / BN59-01330N / BN59-01330M / BN59-01330H / BN59-01312Q etc.
- 【Plug & Play, Easy to Use】This Remote Works right out of the box—simply insert 2 AAA batteries (not included) with no programming/pairing required—and thanks to its ultra-low-power design, enjoys up to 6 months of standby time (depending on usage), eliminating frequent battery replacements and the need to buy a new remote
- 【Durable, High-quality ABS & Ultra-Fast Response】Tested to withstand 200K clicks and made from high-quality ABS for long-lasting durability; provides reliable control up to 45 ft away and a lightning-fast 0.1s response time for seamless operation
- Confirm Anynet+ is enabled in the TV settings.
- Make sure the connected device is powered on and supports HDMI-CEC.
- On the TV, select the intended device from the Connected Devices list.
- Check that the HDMI cable is a high-speed cable. If the problem continues, try a different cable.
- Unplug the devices for a few minutes, reconnect power, and test the connection again.
- Check for firmware updates for the affected devices.
- Only if the earlier checks fail, consider a factory reset. A reset clears device settings, so use it as a last resort and set the device up again afterward.
Set up a soundbar or receiver over ARC/eARC
Enabling Anynet+ provides control communication, but it does not by itself establish an ARC/eARC audio connection. Connect the TV’s designated HDMI ARC port to the audio device’s HDMI OUT (TV-ARC) port. For a third-party soundbar or home theater, enable CEC and ARC on that device if required, then select its HDMI ARC input. In the TV’s sound settings, choose Receiver (HDMI) or the equivalent output option. [Samsung ARC setup guide]
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Scan for outdated or missing drivers - takes under a minute3Clear out junk files and repair common Windows errorsFor eARC
Samsung says eARC requires support from both the TV and soundbar or receiver, plus an eARC-supported cable. Its support guide identifies selected Samsung TVs from 2020 onward and selected Samsung soundbars from 2019 onward as eARC-capable; those year ranges do not mean every model from those years supports eARC. Anynet+ must also be enabled. [Samsung eARC guide]
Rank #3
- Universal Remote Control: Upgrade universal remote control for Samsung smart TV, suitable for Samsung QLED LED HDTV Smart TV
- Wide Compatibility: Compatible with Samsung remote models including BN59-01259E, BN59-01312B/H/G, BN59-01312F, BN59-01312M, BN59-01312A, BN59-01199F, BN59-01259B, BN59-01260A, BN59-01266A, BN59-01241a, BN59-01301A, BN59-01315A, and all Samsung models
- Easy Setup and Operation: No programming or pairing required, easy to operate and use, works for Samsung 6 series, 7 series, 8 series, QLED Q60T Q70T Q80T series smart TV such as RU9000, TU8000, TU8300, Q60T, Q70T, Q80T, Q90T, Q800T, Q900TS, Q950TS, LST7, LS05, RU8000, Q50, Q60, Q70, Q80, Q900, NU8000, NU8500, Q6F, Q7F, Q7C, Q8F, Q9F Series
- Standard IR Remote: The remote has no bluetooth and voice function, operates via infrared technology
- Power Requirements: Battery required AA 1.5V x 2, batteries not included
Where the options are available, open Settings > All Settings > Sound > Expert Settings, set HDMI eARC Mode to Auto, and set Digital Output Audio Format to Auto or Pass-Through. The exact menu layout can vary.
If there is no sound or the output is poor, verify that you used the ARC/eARC ports and a compatible cable, then reconnect the cable. Set eARC Mode to Auto and try PCM, Auto, or Pass-Through for Digital Output Audio Format if the connected device may not support the current format. You can also temporarily disconnect other HDMI devices and retest; Samsung notes that some connected devices may not comply with HDMI connection specifications. [Samsung eARC troubleshooting]
Rank #4
- Universal Compatibility: This infrared replacement remote works with all Samsung Smart TV, LED, LCD, HDTV, 3D, Series TV, Compatible with All Samsung Series TVs
- Multi-Year Support: Compatible with all Samsung series TV Including 2024 year, 2023 year, 2022 year, 2021 year, 2020 year, 2019 year, 2018 year, 2017 year series TV Remote
- Easy to Use Design: Simple universal remote with small and compact size makes this remote control easy to grip and uneasy to slip. No programming or setting up required. Farther transmitting distance, stable performance. Replaces your damage or old one and covers all the functions of the original remote
- Streaming Shortcut Buttons: The universal infrared TV remote features 3 shortcut buttons for NETFLI, Primvide and Hulu for extra convenience
- Compatible Model Numbers: Especially for Samsung remote Model: BN59-01315A BN59-01315J BN59-01301A BN59-01175N BN59-01199F AA59-00741A AA59-00786A AA59-00602A BN59-01247A AA59-00743A BN59-01175B AA59-00818A AA59-00603A BN59-01199G and more
For conventional ARC, Samsung’s Singapore guidance calls for the ARC-labeled TV port and an HDMI cable version 1.4 or higher. Follow the cable requirements for the feature and equipment you are using rather than assuming that ARC and eARC have identical requirements. [Samsung ARC setup guide]
Recommended Free Tools
ARC versus eARC audio capability
Samsung’s guide describes ARC as supporting compressed 5.1 audio, while eARC supports uncompressed 5.1 and 7.1 and high-bitrate or object-based audio formats. Actual playback depends on the formats supported by the TV, source, and audio system; confirm their specifications for the specific codecs you need. [Samsung eARC guide]
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
