Recommended Free Tools
iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
Prefer not to run the server on your own PC? Godlike.Host offers hosted 7 Days to Die servers with free DDoS protection and up to three free backups a day.
If a 7 Days to Die dedicated server accepts one player and rejects, kicks, or times out the next, check the server configuration before reinstalling anything. Set ServerMaxPlayerCount to a value from 2 through the supported maximum of 8, remove unintended reserved slots, and restart the server. For console players, also enable cross-play, keep EAC enabled, and leave EOS sanctions enforcement enabled. Then verify the configured port, router forwarding, firewall rules, visibility mode, and network-protocol setting.
The sections below take you through those checks in the order that isolates the cause fastest.
What “only one player” usually means
The symptom does not identify one universal fault. A real player cap, reserved-slot rules, a cross-platform mismatch, or an inbound network problem can all look like a full server. Discovery and joinability are separate from the headline player limit: a server can appear in a browser and still fail when a second client connects.
| What you observe | Most useful first check | Why it matters |
|---|---|---|
| The server reports “full” after one person joins | ServerMaxPlayerCount and ServerReservedSlots |
The cap may be set to 1, or every unprivileged player may be excluded by reserved slots. |
| A second player is kicked or times out | Router forwarding, host firewall, and the server log | The first connection can work locally while a second inbound path is blocked. |
| PC works but Xbox or PlayStation cannot join | The four cross-platform settings and a full restart | Console compatibility has explicit configuration requirements. |
| The server is missing from the browser | ServerVisibility, port ranges, and protocol settings |
Listing and connection behavior are controlled independently of the player cap. |
Fix the player limit and reserved slots first
Open the active configuration
For a self-hosted server, edit the active serverconfig.xml. A managed host normally exposes the same values in its control panel; use the panel’s equivalent fields rather than editing a file that the host will overwrite.
#1 Best Overall
- Powerful Turbo Fan:CAGIWIRU Electric Air Duster have reached speed up to 130000RPM,Can efficient remove dust and debris.With LED light and Three Adjustable Speed to meet with different cleaning tasks.
- With Attached USB C Fasting Charging cable.Charing 3 hours,Enjoy up to 240 minutes of use on the lowest setting, For third speed can use for 25mins.with four charging options to meet with your needs.
- Wide Application: attached 5 different nozzles,making it suitable for a variety of scenes, such as car,pet, pc, keyboards, and other electronic devices. It also serves for office and home clean duster.
- Handy Design & Portable:Cordless air duster electric nozzle is Light weight and small size, design and comfortable to hold and space saving, convenient to carry around. You can put it in your room or inside the car without taking up space.
- Economical &Reusable: Built durable materials with a long-lasting battery,our CAGIWIRU air duster it's a sustainable alternative to disposable air cans.
- Stop the server or use the host’s configuration editor while it is offline.
- Find
ServerMaxPlayerCount. Set it to the number of simultaneous players you actually need, but do not exceed the documented supported maximum of 8. A setting of 2 permits two concurrent players; it does not guarantee that two clients can reach the host through a blocked firewall. - Find
ServerReservedSlots. Reserved slots are taken from the maximum and are available only to players who meet the configured permission level. For a normal open server, set this value to0. If you intentionally reserve capacity for administrators or another permission group, make sure the joining accounts have that permission. - Save the configuration and restart the server. Test with two accounts after the restart; changing the file while the process is running may not change the active settings.
For example, a maximum of 8 with 2 reserved slots leaves six places for players who do not satisfy the reserved-slot permission rule. If those six places are not available because the permission setup is wrong, ordinary players can see a server that behaves as though it has no room even when the headline maximum is higher.
Enable the complete console cross-play configuration
The official Help Center article dated April 21, 2026 specifies four values for servers that must accept console clients. Set all four together:
Quick wins for a faster PC:
Repair Windows errors before they cause bigger problemsFix Now →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Clear out junk files and repair common Windows errorsFree Scan →| Setting | Required value | Purpose |
|---|---|---|
ServerMaxPlayerCount |
Maximum 8 | Cross-platform servers must stay within the supported concurrent-player limit. |
ServerAllowCrossplay |
True |
Allows the cross-platform connection path. |
EACEnabled |
True |
Keeps Easy Anti-Cheat enabled as required for console-compatible servers. |
IgnoreEOSSanctions |
False |
Leaves EOS sanctions enforcement enabled. |
After changing any of these values, perform a complete server restart, not just a client reconnect. If a PC player can join but a console player cannot, confirm that the console client is connecting to the same restarted instance and that no host-panel profile is replacing the file on startup.
Make the server reachable through the network
Use a valid server port
The normal ServerPort is 26900. For LAN discovery, the reference documentation specifies keeping the port in 26900–26905 or 27015–27020. If you changed it, record the actual value; forwarding 26900 while the server listens on another port sends traffic to the wrong service.
Rank #2
- Screen Cleaner is Your Screen’s New Bestfriend! - EVEO is proud to present a screen cleaner that’s perfectly suited for your TV. Meet your new screen cleaner, computer screen cleaner, laptop cleaner, iPad cleaner, Macbook,tv cleaner or any other electronic device. Our screen cleaner spray and wipe along with the included plush microfiber cloth, easily removes dust, fingerprints & other smudges on the screen’s surface. Clean effectively for a streak-free screen
- Gentle on your Screens - Our screen cleaner spray and wipes is compatible to be used even for the most sensitive LCD, LED, CRT, and OLED screens in proper use. Be at ease knowing that this product is compatible with all the major brands: LG, SONY, Samsung, Sharp, iPad, iPhone, Android screens, Kindle, PC monitors - we’ve got you covered! Can be used as LCD screen cleaner, tv cleaner, smart tv screen cleaner, and more
- Premium Super Soft Plush Microfiber Cloth - Included in this efficient screen cleaning kit. This screen cleaner spray and wipe has our signature plush microfiber cloth specially designed to comply with screens and monitors and leave them streak-free. Has been shown to effectively absorbs stubborn stains, zero streaks, and no fiber shedding. Always use this together with our screen cleaner for the best results
- Easy-to-Use Screen Cleaner Kit + microfiber cleaning cloth - The EVEO Screen Cleaning Kit will easily be your new favorite tool when it comes to taking care of the things you love most, quick and easy solution for a streak-free screen. Simply screw on the sprayer gun on the screen cleaner bottle. Spray the cleaning liquid onto the microfiber cloth, then wipe the screen until desired cleanliness & shine is achieved.
- Quality Screen Care Kit Worth Purchasing - Enjoy a convenient Screen Cleaner anytime, anywhere you need it. Your satisfaction is our top priority. We stand behind the quality of our products and that’s why, you shouldn’t be worrying at all. We manufacture the Best Screen Cleaner. and can be used for laptop cleaning kit, laptop screen cleaner, tv screen cleaner for smart tv. MacBook screen cleaner, monitor cleaner or screen cleaner spray for electronic devices with microfiber cleaning cloth
Give the host a stable private address
On a home network, reserve the server computer’s private IP address in the router’s DHCP settings or configure a static address on the host. A forwarding rule tied to an address that later changes will silently stop working.
Forward and allow every required port
- In the router, forward the configured game and query ports to the host’s fixed private IP. Use the protocol and port values shown by the server configuration or hosting panel; do not assume that changing the game port automatically changes every query port.
- Allow the same traffic through the operating-system firewall on the server computer. The Fun Pimps support FAQ lists the Steam firewall ports that must be permitted; apply those rules to the active network profile.
- If the host is behind more than one router, carrier-grade NAT, or a modem/router combination, identify which device owns the public address. Forwarding on only the inner router will not expose the server.
- Restart the server and test from a client outside the host’s LAN, such as a friend on another internet connection. A test from the same LAN can succeed through local routing even when internet clients cannot enter.
If the browser lists the server but the second client times out, treat the result as an inbound NAT or firewall problem until the server log demonstrates a different rejection. A successful first connection is not proof that all required traffic is forwarded.
The Tool Desk
Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Check visibility and direct connection behavior
ServerVisibility determines how the server is listed:
| Value | Meaning | What the player should do |
|---|---|---|
2 |
Public | The server can appear in the public listing, subject to normal browser and network delays. |
1 |
Friends-only | A dedicated server is not a friend account. The first player must connect manually by IP; do not use the absence of a friend listing as evidence that the player cap is one. |
0 |
Not listed | Use a direct IP connection and the configured port. |
When troubleshooting, temporarily choose the visibility mode that matches your test method. If you are testing direct IP access, record the public address and port exactly as configured. Listing changes can require a restart and may take time to propagate, but they do not increase ServerMaxPlayerCount.
Rank #3
- 【Large size】：Measuring 800 x 300 mm/ 31. 5×12 inches, which is wider and taller than others. Large mouse pad can perfectly fit your keyboard and mouse of any size, and there is also ample space for peripherals such as phones, tablets, etc.
- 【LED backlight mouse pad】：Blade Hawks RGB mouse pad provides 7 static modes and 7 dynamic modes will give you the options you are looking for. Power-off memory function remembers the last lighting mode you selected. The super glow fiber Chroma will give you a colorful gaming setup that you want.
- 【Anti-slip rubber base】：Made from Natural rubber, this gaming mousepad will firmly grip your desktop, allowing you to enjoy the ultimate precision in the games you are most passionate about. It also comes with a texture that enhances this ability even further.
- 【Smooth and waterproof surface】: Micro-textured cloth surface, for extremely precise mouse control and a smooth movement. When liquid splashes on the gaming mouse pad, it forms water droplets and slides down. Will not delay your work or gameplay.
- 【Plug and play】: This mouse and keyboard pad is powered by USB, plug and play, no driver required. One button control light modes. Press one time to change the lighting mode, press twice to change the brightness, press and hold about 3 seconds turn ON/OFF.
Review ServerDisabledNetworkProtocols only after basic checks
The network-protocol setting must match the topology. The reference guidance says dedicated servers should disable SteamNetworking when there is no NAT router between users or when port forwarding has been set up correctly. Do not copy a value from another server without considering whether clients reach this host through a router, a direct public address, or a managed host’s network.
- Document whether the server has a router performing NAT and whether the configured ports are forwarded to it.
- Compare that topology with the current
ServerDisabledNetworkProtocolsvalue. - Make one deliberate change, restart, and test from an external client.
- If the change makes discovery worse, restore the previous value and use the server log to identify the failed protocol rather than changing several settings at once.
This setting affects how clients establish a connection; it is not a substitute for correcting a one-player maximum or a missing firewall rule.
Use a controlled two-client test
Once the configuration and network values are corrected, test in a way that distinguishes a capacity fault from a reachability fault.
- Start the server and wait until its startup log shows that the world is ready to accept connections.
- Connect client A and confirm that the player appears in the server’s player list.
- From a different internet connection, connect client B. Avoid testing both clients from the host’s LAN if the suspected issue is NAT loopback.
- Record the exact result: an immediate “full” message, a kick after authentication, a timeout, or a join that stalls while downloading the map.
- Stop and save the server log around the failed attempt. Look for a rejection reason, authentication failure, port error, or protocol message.
If the message is “full” with ServerMaxPlayerCount set above 1, inspect reserved slots and confirm that the edited file is the one the running instance actually loads. If client B times out while the browser lists the server, return to forwarding and firewall rules. If both clients connect but the second remains stuck during world transfer, investigate transfer time and logs before changing capacity settings.
Rank #4
- 【Softer and More Comfortable】Vaydeer wrist rest has unique diamond pattern, which is the combination of softness and aesthetics. The materials of wrist rest are improved into higher quality memory foam and covered with silky smooth lycra. The computer wrist rest makes you as comfortable and cushiony as like rest your wrists on clouds.
- 【Ergonomic Wrist Saver】The wrist rests for keyboard and mouse comes with a 17.32×3.15×0.83 inch keyboard wrist pad and a 5.94×3.15×0.83 inch mouse wrist support. Based on ergonomic design, the unique concave shape is the perfect fit for your wrist joints. The wrist rest pad fits most computer keyboards and laptops, improve hand and wrist posture, release your wrist and arm stress.
- 【Non-Slip Rubber Bottom】Featuring an anti-skid silicone base on the bottom, this wrist keyboard support stays firmly in place on your desk, preventing the padding from sliding around, ensuring stable and consistent wrist support during extended computer sessions.
- 【Better Experience & Pain Relief】Our keyboard arm rest is beneficial to alleviate the soreness caused by direct contact and friction between your arm and a hard desk surface, reducing the risk of wrist fatigue or carpal tunnel. The soft texture of memory foam can evenly distribute the pressure around your wrists and provide good support with just enough give.
- 【Helpful in Multiple Scenarios】Whether you're working, studying, writing, typing, gaming, this keyboard and mouse rest combo is an essential accessory to add comfort and support to your hands and wrists. It’s also a great gift for men, women, family, friend, coworker, gamer, teacher, etc.
Do not confuse map-transfer speed with a one-player cap
The Fun Pimps support FAQ notes that map transfer tops out at about 1300 KiB/s even when a higher value is configured. A second player joining for the first time may therefore spend a long time downloading the world, especially on a large save or a slow uplink. A stalled transfer is different from an immediate full-server response or a network timeout. Leave the client connected long enough to distinguish a slow transfer from a rejected join, and use the log to confirm whether the player session was accepted.
Check versions and installation state when settings and ports are correct
The supplied official references do not identify one universal error for every failed second join. If the cap, reserved slots, cross-play values, visibility, ports, firewall, and protocol choice all match the intended topology, compare the server and client versions. A server updated while a client remains on another build can reject a join even though the network path is healthy.
- Confirm that every client is on the same game branch and update level expected by the server.
- Restart the dedicated server after an update so that it is not running an old process against newly installed files.
- Check the server log for the rejected player’s timestamp and account identifier.
- Remove or disable nonessential server-side modifications for one test, because a mod can reject a second connection without changing the advertised player cap.
- Retest with two clean clients before restoring optional changes.
Self-hosted server or managed hosting?
Moving to managed hosting can remove router and host-PC maintenance, but it does not bypass the game’s configuration requirements. Choose based on the operational problem you actually have.
| Decision factor | Self-hosted | Managed hosting |
|---|---|---|
Control of serverconfig.xml |
Direct file and process control; useful for precise troubleshooting. | Usually provided through a control panel or support workflow; confirm that all four cross-play fields are exposed. |
| Router and firewall work | You own the private IP, forwarding, and host-firewall rules. | The provider handles its network edge, while you still configure in-panel settings and client access. |
| Console cross-play | Available only when the server meets the official four-setting checklist. | Must be explicitly supported by the selected server plan and software image; do not infer support from a generic PC listing. |
| Availability when your PC is off | The server stops unless the host machine and connection remain online. | The provider’s machine normally remains online, subject to its service terms. |
| Geographic latency | Depends on your home uplink and the players’ distance from it. | Depends on the selected data-center location; choose a region close to most players. |
| Backups and recovery | You must schedule world backups and test restoration. | Backup frequency, retention, and restore controls vary by provider and must be verified before purchase. |
| Total monthly cost | Uses your existing hardware and connection, but consumes electricity and maintenance time. | A recurring charge applies; the amount, included resources, and any backup fees are provider-specific. |
Changing hosts is reasonable when you cannot maintain a stable public route or keep the host PC online. It is not the first fix for a value of 1 in ServerMaxPlayerCount or an accidental reserved-slot rule.
Best Value
- 【No Drill Mounted】Cable management tray can be assembled in as little as 3 minutes or less-simply. Side clips easily clampe the edge of desk, pass through the holes on the sides, and secure excess cables with baskets. Desk cable management supports inward or outward installation to meet your needs in different scenarios, and provides you with great convenience when collecting and organizing wires.
- 【Rubber Pad Protects Desk】Wire organizer under desk built-in soft rubber pads on the clamp protect your desk from scratches, so you will not damage your furniture or office.
- 【Sturdy and Beautiful】Cord management under desk is made of high-quality carbon steel and holds about 15 lbs. The wire basket has 2 holes on each side of the tray to enable your cables to pass freely. Cable baskets are suitable for desk thickness use from 0.4" to 2.4".
- 【Space Saving & Keep Organized】Desk cable management tray holds all your power cords, outlet strips, USB hubs and computer transformers hidden from your feet, and the data cables will not enter the vacuum cleaner to keep your desk clean and tidy. Desk wire organizer is also suitable for use in the kitchen and outdoors.
- 【Reduce Safety Risks】Cable tray under desk keeps all plugs away from your kids, no more worry about tripping. Using 2 holes wire tray saves extra space, helps you easily cabling and wire protection. The mesh design is not easy to accumulate dust, but avoids safety accidents caused by messy wires.
Common cases and the shortest recovery path
The server says it is full after one player
- Read the active
ServerMaxPlayerCount, not just a template file or control-panel default. - Set it to at least 2 and no more than 8.
- Set
ServerReservedSlotsto 0 unless you have intentionally configured privileged reservations. - Restart and repeat the two-client test.
The second player is kicked immediately
Capture the server log at the moment of the kick. If the log shows a connection or handshake failure, verify forwarding, firewall rules, and the protocol setting. If it shows authentication, anti-cheat, sanctions, or version errors, apply the cross-play values where relevant and align client/server builds.
PC can join but console cannot
Set ServerMaxPlayerCount no higher than 8, ServerAllowCrossplay=True, EACEnabled=True, and IgnoreEOSSanctions=False. Restart the server, then test from the console network. A PC-only success does not establish console compatibility.
Free tools Windows power users keep installed
One-click scans. No signup required.
The server works only on the same LAN
Use a fixed private IP, forward the configured game and query ports, allow them through the host firewall, and test from outside the LAN. Check for a second router or carrier-grade NAT if forwarding appears correct but external clients still time out.
The server is not listed, but direct IP works
Inspect ServerVisibility. Values 0 and 1 intentionally limit listing, and a friends-only dedicated server may require manual IP connection because it is not a friend account. Listing behavior alone does not indicate a one-player limit.
Quick Recap
Prevent the problem from returning
- Keep a known-good copy of the active configuration and note the port, private IP, and reserved-slot policy.
- After changing settings, restart the server and record the startup values from the log.
- Reserve the host’s private IP so router rules continue pointing to the same machine.
- Schedule world backups and periodically test that a backup can be restored.
- After game or server updates, verify that clients and the dedicated server use the same build before troubleshooting networking.
- When adding a console player, recheck all four cross-play values rather than changing only
ServerAllowCrossplay. - Keep a two-client test outside the host’s LAN available; it is the quickest way to detect a broken public route.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
